[1002] R. Vasudeva, “Reusing business objects,” Object Magazine, vol. 6, no. 11, pp. 46-9, Jan., 1997.

[1003] M. T. Vendelo, “Recycling technology-a short cut to new business creation in software companies,” Innovation in Technology Management. The Key to Global Leadership. PICMET '97. Portland International Conference on Management of Engineering Technology (Cat. No.97CH35982), pp. 593-7, 1997.

[1004] E. E. Villarreal and D. Batory, “Rosetta: a generator of data language compilers,” Softw. Eng. Notes (USA), Software Engineering Notes, vol. 22, no. 3, pp. 146-56, May, 1997.

[1005] R. V. Vishnuvajjala, T. Wei-Tek, R. Mojdehbakhsh, and L. Elliott, “Specifying timing constraints in real-time object-oriented systems,” Proceedings. IEEE High-Assurance Systems Engineering Workshop (Cat. No.96TB100076), pp. 32-9, 1997.

[1006] J. Vlissides, “Multicast,” C++ Report, vol. 9, no. 8, pp. 37-41, 51, Sept., 1997.

[1007] J. Vlissides, “Patterns: the top ten misconceptions,” Object Magazine, vol. 7, no. 1, pp. 30-3, March, 1997.

[1008] A. Von Mayrhauser and A. M. Vans, “On increasing our knowledge of large-scale software comprehension,” Empirical Software Engineering, 1997.

[1009] R. M. Voyles, A. Agah, P. K. Khosla, and G. A. Bekey, “Tropism-based cognition for the interpretation of context-dependent gestures,” Proceedings - IEEE International Conference on Robotics and Automation, 1997.

[1010] T. Vu and L. Dar-Biau, “A procurement-centric model for engineering component-based software systems,” Proceedings. Fifth International Symposium on Assessment of Software Tools and Technologies (Cat. No.97TB100140), pp. 70-9, 1997.

[1011] S. Vuppala, F. G. Gray, and J. R. Armstrong, “Methodology for VHDL performance model construction and validation,” Conference Proceedings - IEEE SOUTHEASTCON, 1997.

[1012] J. R. Wagner and J. F. Keane, “Strategy to verify chassis controller software - dynamics, hardware, and automation,” IEEE Transactions on Systems, Man, and Cybernetics Part A:Systems and Humans, 1997.

[1013] K. Wallnau, E. Morris, P. Feiler, A. Earl, and E. Litvak, “Engineering component-based systems with distributed object technology,” Worldwide Computing and Its Applications. International Conference, WWCA'97. Proceedings, pp. 58-73, 1997.

[1014] K. C. Wallnau, “Repairing coordination mismatches among legacy components,” Proceedings International Conference on Software Maintenance (Cat. No.97CB36119), pp. 302, 1997.

[1015] R. A. Walpole and M. M. Burnett, “Supporting reuse of evolving visual code,” Proceedings. 1997 IEEE Symposium on Visual Languages (Cat. No.97TB100180), pp. 68-75, 1997.

[1016] J. A. Walter, “SORMA: interoperating distributed robotics hardware,” Proceedings. 1997 IEEE International Conference on Robotics and Automation (Cat. No.97CH35992), pp. 3511-18 vol.4, 1997.

[1017] L. Wang, L. Zhang, and Z. Gao, “Assemblage-based process engineering environment,” Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 1997.

[1018] Q. Wang, W. Zhang, and J. Cai, “A system model of object-oriented reuse components library manager,” Journal of Software, vol. 8, no. 5, pp. 391-6, May, 1997.

[1019] Y. Wang, G. King, I. Court, M. Ross, and G. Staples, “On testable object-oriented programming,” Software Engineering Notes, vol. 22, no. 4, pp. 84-90, July, 1997.

[1020] S. Watanabe, “Professionalism through OO and reuse,” IEEE Software, vol. 14, no. 1, pp. 26, Jan.-Feb., 1997.

[1021] R. B. Watson, “Towards the specification of simulation models using patterns,” Proceedings of the 1997 Summer Computer Simulation Conference Simulation and Modeling Technology for the Twenty-First Century, pp. 271-6, 1997.

[1022] S. Watts and P. J. Guinan, “Software development under conditions of high task complexity and ambiguity,” Proceedings of the Hawaii International Conference on System Sciences, no. formation Systems - Organizational Systems and Technology v 3 1997. IEEE Comp Soc, 1997.

[1023] L. Wei, “An empirical study of software reuse in reconstructive maintenance,” Journal of Sofware Maintenance: Research and Practice, vol. 9, no. 2, pp. 69-83, March-April, 1997.

[1024] K. Weihe, “Reuse of algorithms: Still a challenge to object-oriented programming,” Proceedings of the Conference on Object-Oriented Programming Systems, Languages, and Applications, OOPSLA, vol. 32, no. 10 Oct 1997. ACM, 1997.

[1025] K. Wei-Ming and H. Adeli, “Distributed object-oriented blackboard model for integrated design of steel structures,” Microcomputers in Civil Engineering, vol. 12, no. 2, pp. 141-55, March, 1997.

[1026] T. Wei-Tek, “Trends in software technology,” Proceedings Twenty-First Annual International Computer Software and Applications Conference (COMPSAC'97) (Cat. No.97CB36112), pp. 173-4, 1997.

[1027] M. Weitzel, “From C to C++: code recycling in practice,” OOP'97. Conference Proceedings, pp. 1-5, 1997.

[1028] J. L. Weldon, “A career in data modeling,” BYTE (International Edition), vol. 22, no. 6, pp. 103-6, June, 1997.

[1029] D. Wen and D. Wang, “The implementation of parallel C++ languages for workstation clusters,” Chinese Journal of Computers, vol. 20, no. 1, pp. 9-17, Jan., 1997.

[1030] D. Wen, D. Wang, and N. Zhang, “CCPP: The design and implementation of a concurrent C plus plus language,” Ruan Jian Xue Bao/Journal of Software, 1997.

[1031] B. Wetmore, “Objectives of object-oriented technology,” America's Network, pp. 80-84 : Charts, 1997.

[1032] I. White, “Understanding the AWT,” Object Expert, vol. 2, no. 3, pp. 14-17, March-April, 1997.

[1033] R. Whiting, “Buy! Sell!,” Software Magazine, vol. 17, no. 14, pp. 32-46, 1997.

[1034] T. A. Wiggerts, “Using clustering algorithms in legacy systems remodularization,” Proceedings of the Fourth Working Conference on Reverse Engineering (Cat. No.97TB100197), pp. 33-43, 1997.

[1035] D. Wilcox, “Replicants,” Exe, vol. 12, no. 5, pp. 41, 43-4, 46, Oct., 1997.

[1036] E. Wilken, “New horizons for multimedia world,” Graphic Arts Monthly, pp. 74, 1997.

[1037] A. Williams, “Visual Basic 5 and Active X controls,” Dr. Dobb's Journal, vol. 22, no. 3, pp. 74, 76-8, 82-4, 86, March, 1997.

[1038] M. Williamson, “Avoiding the point of no reuse,” Cio, pp. 38-44+, 1997.

[1039] M. Williamson, “Bits and pieces,” Cio, pp. 56-64 : Charts, 1997.

[1040] M. Williamson, “It's no accident,” Cio, pp. 46, 1997.

[1041] M. Williamson, “More lives than a cat,” Cio, pp. 34-36, 1997.

[1042] M. Williamson, “Rethinking methodology,” Cio, pp. 40, 1997.

[1043] M. Williamson, “Software reuse reading,” Cio, pp. 24, 1997.

[1044] J. M. Wing, “Subtyping for distributed object stores,” Formal Methods for Open Object-based Distributed Systems. Vol.2 IFIP TC6 WG6.1 International Workshop on Formal Methods for Open Object-based Distributed Systems (FMOODS '97), pp. 305-18, 1997.

[1045] E. E. Woodward and G. T. Mackulak, “Detecting logic errors in discrete-event simulation: reverse engineering through event graphs,” Simulation Practice and Theory, 1997.

[1046] H. Yang, W. C. Chu, and Y. Sun, “A practical system of COBOL program reuse for reengineering,” Proceedings. Eighth IEEE International Workshop on Software Technology and Engineering Practice incorporating Computer Aided Software Engineering, pp. 45-57, 1997.

[1047] H. Yang, P. Luker, and W. C. Chu, “Code understanding through program transformation for reusable component identification,” Program Comprehension, Workshop Proceedings, 1997.

[1048] K. Yongbeom, “A method for the classification and retrieval problem of reusable software resources,” Information Processing & Management, vol. 33, no. 4, pp. 513-22, July, 1997.

[1049] M. Young, “ICSE 97 Doctoral Consortium,” Proceedings - International Conference on Software Engineering, 1997.

[1050] T. Young, “Extended 4GL solution,” InfoWorld, pp. 66, 1997.

[1051] T. Young, “Sorting the strategies,” InfoWorld, pp. 64-65, 1997.

[1052] J. Zamorano, A. Alonso, and J. A. de la Puente, “Building safety-critical real-time systems with reusable cyclic executives,” Control Engineering Practice, vol. 5, no. 7, pp. 999-1005, July, 1997.

[1053] Y. Zhang, L. Yang, and J. Tong, “Construct domain-specific approach to IC-CAD software system,” Chinese Journal of Electronics, 1997.

[1054] J. Zhao, J. Chen, and G. Zheng, “Message conversion and a new type system for OO model,” SIGPLAN Notices, vol. 32, no. 9, pp. 61-7, Sept., 1997.

[1055] J. A. Zinky, D. E. Bakken, and R. E. Schantz, “Architectural support for quality of service for CORBA objects,” Theory and Practice of Object Systems, vol. 3, no. 1, pp. 55-73, 1997.

[1056] E. Zoltan, “Is top-down design a waste of time? Is bottom-up coding faster?,” M Computing, vol. 5, no. 3, pp. 9-12, Aug., 1997.

[1057] J. C. Zubeck, “Implementing reuse with RAD tools' native objects,” Computer, vol. 30, no. 10, pp. 60-5, Oct., 1997.

[1058] D. F. Zucker, R. B. Lee, and M. J. Flynn, “Achieving subword parallelism by software reuse of the floating point data path,” Proc. SPIE - Int. Soc. Opt. Eng. (USA), Proceedings of the SPIE - The International Society for Optical Engineering, vol. 3021, pp. 51-64, 1997.

[1059] “Defining visions in context: models, processes and tools for requirements engineering,” Information Systems, 1996.

[1060] “How Germany's OERAG and SOFTPRO are using frameworks in the insurance industry,” I/S Analyzer Case Studies, pp. 2-7, 1996.

[1061] “How Marcam is using OO frameworks in a new enterprise resource planning system,” I/S Analyzer Case Studies, pp. 7-12, 1996.

[1062] “How Nicholas-Applegate is using frameworks from Next Computer,” I/S Analyzer Case Studies, pp. 13-15, 1996.

[1063] “How to avoid reuse potholes,” Software Magazine, pp. 35-36 : Charts, Graphs, 1996.

[1064] “IEEE ABBET guide for the understanding of the A broad-based environment for test (ABBET)' standard,” , 26, 1996.

[1065] “IEEE standard for information technology - software reuse - data model for reuse library interoperability: Basic Interoperability Data Model (BIDM),” , 4, 1996.

[1066] “Information technology guide : Internet,” Government Executive, pp. 12A, 1996.

[1067] “JavaSoft's architecture vs. Microsoft's ActiveX,” Computer Reseller News, pp. 75,80, 1996.

[1068] “Off-the-shelf IBS toolkit,” Financial Technology International Bulletin, pp. 2, 1996.

[1069] “Proceedings 1996 Asia-Pacific Software Engineering Conference,” , 1996.

[1070] “Proceedings of 2nd International Symposium on Object Technologies for Advanced Software,” , 1996.

[1071] “Proceedings of 1995 International Conference on Object Oriented Information Systems,” , 1996.

[1072] “Proceedings of Fourth IEEE International Conference on Software Reuse,” , 1996.

[1073] “Proceedings of International Conference on Software Maintenance,” , 1996.

[1074] “Proceedings of Object World UK '96,” , 1996.

[1075] “Proceedings of OOP 96,” , 1996.

[1076] “Proceedings of the 1996 2nd IEEE International Conference on Engineering of Complex Computer Systems,” Proceedings of the IEEE International Conference on Engineering of Complex Computer Systems, ICECCS, 1996.

[1077] “Proceedings of the 1996 4th ACM SIGSOFT Symposium on the Foundations of Software Engineering,” Proceedings of the ACM SIGSOFT Symposium on the Foundations of Software Engineering, 1996.

[1078] “Proceedings of the 1996 7th ACM Conference on Hypertext,” Proceedings of the ACM Conference on Hypertext, 1996.

[1079] “Proceedings of the 1996 Conference on Object-Oriented Programming Systems, Languages & Applications,” SIGPLAN Notices (ACM Special Interest Group on Programming Languages), 1996.

[1080] “Proceedings of the 1996 IEEE Conference on Software Maintenance, ICSM,” Conference on Software Maintenance, 1996.

[1081] “Proceedings of the International Workshop on Systematic Reuse: Issues in Initiating and Improving a Reuse Program (ISBN 3 540 76012 1),” , 1996.

[1082] “Putting the pieces together,” Midrange Systems, pp. 42, 1996.

[1083] “Realizing the dream,” Software Magazine, pp. 58-60, 1996.

[1084] “Refreshing the object cupboard,” Software Magazine, pp. 38-40 : Charts, 1996.

[1085] “Reusable Objects,” Data Communications, pp. 22, 1996.

[1086] “Reuse is not guaranteed,” Software Magazine, pp. 54, 1996.

[1087] “Reuse roles: producers, supporters, and utilizers,” Hewlett-Packard Journal, 1996.

[1088] “Reuse Rx : Education and training,” Software Magazine, pp. 45-46, 1996.

[1089] “Sun's JavaSoft division brews up draft specification for Java Beans,” Computer Reseller News, pp. 74, 1996.

[1090] “What's the ROI on objects?,” Software Magazine, pp. 53-56 : Charts, 1996.

[1091] “Why new development at Texas Instruments requires business objects,” I/S Analyzer Case Studies, pp. 11-15 : Charts, 1996.

[1092] “With objects, Xerox doesn't duplicate efforts,” Software Magazine, pp. 60, 1996.

[1093] A. Aarsten, D. Brugali, and G. Menga, “Designing concurrent and distributed control system,” Communications of the ACM, vol. 39, no. 10, pp. 50-8, Oct., 1996.

[1094] M. H. Abd-El-Barr, C. McCrosky, and W. Li, “Less expensive test pattern generation technique,” IEE Proceedings-Computers and Digital Techniques, vol. 143, no. 1, pp. 17-22, Jan., 1996.

[1095] B. L. Achee and D. L. Carver, “Object extensions to Z: a survey,” International Journal of Software Engineering and Knowledge Engineering, vol. 6, no. 3, pp. 507-30, Sept., 1996.

[1096] S. T. Acuna and N. Juristo, “Software process model for KBS development,” CC-AI, The Journal for the Integrated Study of Artificial Intelligence, Cognitive Science and Applied Epistemology, vol. 13, no. 4, pp. 309-47, 1996.

[1097] A. R. Adl-Tabatabai, T. Gross, and L. Guei-Yuan, “Code reuse in an optimizing compiler,” SIGPLAN Not. (USA), SIGPLAN Notices, vol. 31, no. 10, pp. 51-68, Oct., 1996.

[1098] T. Afzal, M. Breternitz, M. Kacher, S. Menyhert, M. Ommerman, and W. Su, “Motorola PowerPC Migration Tools-emulation and translation,” Digest of Papers. COMPCON 96. Technologies for the Information Superhighway. Forty-First IEEE Computer Society International Conference, pp. 145-50, 1996.

[1099] T. Ajisaka, “The software quark model: a universal model for CASE repositories,” Information and Software Technology, vol. 38, no. 3, pp. 173-80, March, 1996.

[1100] M. Aksit, “Designing software architectures as knowledge specializations,” Proceedings. The Twentieth Annual International Computer Software and Applications Conference (COMPSAC '96) (Cat. No.96CB35986), pp. 352, 1996.

[1101] F. Aldea and G. Sanchez, “Improving reuse in space (IRIS),” International Symposium on On-board Real-time Software ISOBRTS (ESA SP-375), pp. 205-11, 1996.

[1102] I. Alloui and F. Oquendo, “Support for environment-mediated human cooperation in large-scale reuse-based projects,” Proceedings of the International Software Process Workshop, 1996.

[1103] A. Alonso, J. A. de la Puente, and A. Alvarez, “Building reusable software architectures with Ada,” Proceedings of the IEEE International Conference on Engineering of Complex Computer Systems, ICECCS, 1996.

[1104] J. Ambrosio, “Objective perspective,” Computerworld, pp. 12, 1996.

[1105] T. Ando, K. Takahashi, and Y. Kato, “A topological framework of stepwise specification for concurrent systems,” IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. E79-A, no. 11, pp. 1760-7, Nov., 1996.

[1106] C. Andre and D. Gaffe, “Proving properties of GRAFCET with synchronous tools,” Symposium on Discrete Events and Manufacturing Systems. CESA'96 IMACS Multiconference. Computational Engineering in Systems Applications, pp. 777-82, 1996.

[1107] E. Andren, “Parts finder,” Informationweek, pp. 80-84, 1996.

[1108] Anon, “Proceedings of the 1996 4th IEEE AFRICON Conference. Part 2 (of 2),” IEEE AFRICON Conference, 1996.

[1109] Anon, “Proceedings of the 1996 10th International Software Process Workshop, ISPW,” Proceedings of the International Software Process Workshop, 1996.

[1110] G. H. Anthes, “Seekers of reusable code can now pull it from Web,” Computerworld, pp. 69, 1996.

[1111] M. Aoyama, “Componentware; building applications with software components,” Joho Shori, vol. 37, no. 1, pp. 71-9, Jan., 1996.

[1112] M. V. Aponte and R. Di Cosmo, “Type isomorphisms for module signatures,” Programming Languages: Implementations, Logics, and Programs. 8th International Symposium, PLILP '96 Proceedings, pp. 334-46, 1996.

[1113] T. Arano, K. Nakanishi, and T. Fujisaki, “A metric suite and an evaluation methodology for class abstraction in framework maturity process,” Transactions of the Institute of Electronics, Information and Communication Engineers D-I, vol. J79D-I, no. 10, pp. 719-28, Oct., 1996.

[1114] F. Arbab, C. L. Blom, F. J. Burger, and C. T. H. Everaars, “Reusable coordinator modules for massively concurrent applications,” Euro-Par '96 Parallel Processing. Second International Euro-Par Conference. Proceedings, pp. 664-77 vol.1, 1996.

[1115] S. Arbaoui and F. Oquendo, “Reuse sensitive process models: Are process elements software assets too?,” Proceedings of the International Software Process Workshop, 1996.

[1116] J. Arima, “Automatic programming from a small number of examples,” Fujitsu Scientific and Technical Journal, 1996.

[1117] V. Arlanzon, A. Bernaras, and I. Laresgoiti, “Configuring service recovery planning with the CommonKADS library,” Advances in Knowledge Acquisition. 9th European Knowledge Acquisition Workshop, EKAW '96. Proceedings, pp. 338-53, 1996.

[1118] R. C. Aronica and D. E. Rimel, Jr., “Wrapper your legacy systems,” Datamation, 1996.

[1119] R. B. Aronson, “Forward thinkers take to reverse engineering,” Manufacturing Engineering, pp. 34-44 : Charts, 1996.

[1120] P. Arpaia, F. Cennamo, P. Daponte, and M. Savastano, “Distributed laboratory based on object-oriented measurement systems,” Conference Record - IEEE Instrumentation and Measurement Technology Conference, 1996.

[1121] P. Arpaia, F. Cennamo, P. Daponte, and M. Savastano, “A distributed laboratory based on object-oriented measurement systems,” Measurement (Netherlands), Measurement, vol. 19, no. 3-4, pp. 207-15, Nov.-Dec., 1996.

[1122] V. Arunachalam and W. Sasso, “Cognitive processes in program comprehension : An empirical analysis in the context of software reengineering,” Journal of Systems & Software, pp. 177-189, 1996.

[1123] N. C. Audsley, A. Burns, R. I. Davis, D. J. Scholefield, and A. J. Wellings, “Integrating optional software components into hard real-time systems,” Software Engineering Journal, vol. 11, no. 3, pp. 133-40, May, 1996.

[1124] D. Avrilionis, N. Belkhatir, and P. Y. Cunin, “Improving software process modelling and enactment techniques,” Software Process Technology. 5th European Workshop, EWSPT '96 Proceedings, pp. 65-74, 1996.

[1125] D. Avrilionis, N. Belkhatir, and P. Y. Cunin, “A unified framework for software process enactment and improvement,” Proceedings. Fourth International Conference on the Software Process. Improvement and Practice, pp. 102-11, 1996.

[1126] D. Avrilionis, P. V. Cunin, and C. Fernstrom, “OPSIS: a view mechanism for software processes which supports their evolution and reuse,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 38-47, 1996.

[1127] D. Avrilionis and P.-Y. Cunin, “Process model reuse support - the OPSIS approach,” Proceedings of the International Software Process Workshop, 1996.

[1128] B. Bachmann, “Applying theory interpretation to knowledge interchange,” Proceedings of the Ninth Florida Artificial Intelligence Research Symposium, FLAIRS-96, pp. 177-81, 1996.

[1129] D. F. Bacon and P. F. Sweeney, “Fast static analysis of C++ virtual function calls,” SIGPLAN Not. (USA), SIGPLAN Notices, vol. 31, no. 10, pp. 324-41, Oct., 1996.

[1130] N. V. Balasubramanian and C. H. K. Tsang, “A meta-model for generic object-oriented CASE tool,” Software Engineering in Higher Education II. Second International Conference on Software Engineering in Higher Education, SEHE 95, pp. 295-302, 1996.

[1131] C. Bamford and B. Dollery, “OODREX: an object-oriented design tool for reuse with exceptions,” OOIS '95. 1995 International Conference on Object Oriented Information Systems Proceedings, pp. 248-51, 1996.

[1132] G. Banavar and G. Lindstrom, “An application framework for module composition tools,” ECOOP '96 - Object-Oriented Programming. 10th European Conference. Proceedings, pp. 91-113, 1996.

[1133] S. Bandinelli and S. Rementeria, “Software reuse introduction requires a process perspective,” Proceedings of the International Software Process Workshop, 1996.

[1134] R. Bannatyne, “The M68HC12 addressing mode and instruction set improvements,” Electronic Engineering, vol. 68, no. 838, pp. 31-2, 34, 36, Oct., 1996.

[1135] B. Banzhof and D. Greenfield, “Megafunctions enhance ATM switch design,” Electronic Engineering Times, pp. 48,60, 1996.

[1136] Y. Bao and E. Horowitz, “Integrating through user interface: a flexible integration framework for third-party software,” Proceedings - IEEE Computer Society's International Computer Software & Applications Conference, 1996.

[1137] A. Bapat, J. Wasch, K. Aberer, and J. M. Haake, “HyperStorM: an extensible object-oriented hypermedia engine,” Seventh ACM Conference on Hypertext. Hypertext 96, pp. 203-14, 1996.

[1138] B. Barazesh, T. Berry, M. Saidy, and S. Zhang, “Overview of an advanced system architecture for control centre applications,” IEE Conference Publication, 1996.

[1139] M. Barbuceanu and M. S. Fox, “The Agent Building Shell: a tool for building enterprise multi-agent systems,” Canadian Artificial Intelligence, pp. 9-11, 15, Autumn, 1996.

[1140] M. Barbuceanu and M. S. Fox, “The architecture of an agent building shell,” Intelligent Agents II. Agent Theories, Architectures, and Languages. IJCAI95 Workshop (ATAL) Proceedings, pp. 235-50, 1996.

[1141] M. Bari, P. Gabrini, C. Rolland, and K. Zeroual, “Active information systems, from object-oriented design to Ada 95,” Proceedings TRI-Ada '96, pp. 115-24, 1996.

[1142] J. Baron, “People side of software a lesson plan for establishing a successful training program,” Software Engineering Education Conference, Proceedings, 1996.

[1143] D. J. Barrett, A. Kaplan, and J. C. Wileden, “Automated support for seamless interoperability in polylingual software systems,” Proceedings of the ACM SIGSOFT Symposium on the Foundations of Software Engineering, 1996.

[1144] J. J. Barton and L. R. Nackman, “Advanced C++ with applications from science and engineering,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 233-4, 1996.

[1145] V. R. Basili, L. C. Briand, and W. L. Melo, “How reuse influences productivity in object-oriented systems,” Communications of the ACM, vol. 39, no. 10, pp. 104-116, Oct., 1996.

[1146] P. G. Bassett, “The 3 paradoxes-No.1: modeling reality,” Object Magazine, vol. 6, no. 2, pp. 58-9, April, 1996.

[1147] P. G. Bassett, “Paradox no. 2: class hierarchies.2,” Object Magazine, vol. 6, no. 2, pp. 60-1, 70, April, 1996.

[1148] P. G. Bassett, “Paradox no. 3: brittle software,” Object Magazine, vol. 6, no. 2, pp. 62-3, April, 1996.

[1149] D. Batory, “Subjectivity and GenVoca generators,” International Conference on Software Reuse, 1996.

[1150] D. Batory and B. J. Geraci, “Validating component compositions in software system generators,” International Conference on Software Reuse, 1996.

[1151] E. Battiston, F. De Cindio, and G. Mauri, “Modular algebraic nets to specify concurrent systems,” IEEE Transactions on Software Engineering, pp. 689-705 : Charts, 1996.

[1152] K. Beck, R. Crocker, G. Meszaros, J. O. Coplien, L. Dominick, F. Paulisch, and J. Vlissides, “Industrial experience with design patterns,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 103-14, 1996.

[1153] J. Beidler, “REUSE/Ada,” Proceedings TRI-Ada '96, pp. 211-17, 1996.

[1154] M. A. Beims and L. B. Strader, “Software process progress in a dynamic business environment,” Software Process Technology. 5th European Workshop, EWSPT '96 Proceedings, pp. 289-90, 1996.

[1155] D. Belanger, “JANUS: software tools - looking back/looking forward,” Proceedings of the International Symposium on Assessment of Software Tools, 1996.

[1156] N. Belkhatir and J. Estublier, “Supporting reuse and configuration for large scale software process models,” Proceedings of the International Software Process Workshop, 1996.

[1157] Z. Bellahsene, “View mechanism for schema evolution in object-oriented DBMS,” Advances in Databases. 14th British National Conference on Databases. BNCOD 14. Proceedings, pp. 18-35, 1996.

[1158] R. Bellinzona, M. G. Fugini, and B. Pernici, “Reusing specifications in OO applications,” Conference on Software Measurement and Management, pp. 167-77, 1996.

[1159] L. Bellissard, S. B. Atallah, F. Boyer, and M. Riveill, “Distributed application configuration,” Proceedings of the 16th International Conference on Distributed Computing Systems (Cat. No.96CB35954), pp. 579-85, 1996.

[1160] S. Berestizhevsky and T. Kolosova, “RAD with SAS Software: strategies, techniques, and tips,” Proceedings of the Twenty-First Annual SAS Users Group International Conference, SUGI 21, pp. 17-22 vol.1, 1996.

[1161] R. Berghammer, “Reusable algorithm schemes in ML as an example of the graph searching problem,” Informatik Forschung und Entwicklung, vol. 11, no. 4, pp. 179-90, 1996.

[1162] J. O. Bergholm, J. M. Davis, B. Nadji, and P. D. Ting, “Service Design and Inventory System-an object-oriented reusable software asset,” AT&T Technical Journal, vol. 75, no. 2, pp. 47-57, March-April, 1996.

[1163] L. Bergmans and M. Aksit, “Composing synchronization and real-time constraints,” Journal of Parallel and Distributed Computing, vol. 36, no. 1, pp. 32-52, 10, 1996.

[1164] G. Berrisford, “How the fuzziness of the real-world limits reuse by inheritance between business objects,” OOIS '95. 1995 International Conference on Object Oriented Information Systems Proceedings, pp. 3-18, 1996.

[1165] J. S. Bers, “Accelerating product delivery timetables,” Bank Systems & Technology, pp. 33, 1996.

[1166] J. S. Bers, “Transforming customers into virtual bankers,” Bank Systems & Technology, pp. 42-44 : Charts, 1996.

[1167] D. Bert, R. Echahed, and K. Adi, “Resolution of goals with the functional and logic programming language LPG: impact of abstract interpretation,” Algebraic Methodology and Software Technology. 5th International Conference, AMAST '96. Proceedings, pp. 629-32, 1996.

[1168] M. Bertram, “Concepts of reuse in insurance application architecture,” Informationssyst.-Archit. (Germany), Informationssystem-Architekturen, vol. 3, no. 1, pp. 20-2, Sept., 1996.

[1169] A. T. Berztiss, “Software process and application domains,” Proceedings of the International Software Process Workshop, 1996.

[1170] L. Bessler, “Better low-cost InfoGeographics today: Improved readability and usability for PROC GMAP output,” Proceedings of the Twenty-First Annual SAS Users Group International Conference, SUGI 21, pp. 820-9 vol.1, 1996.

[1171] S. Bhansali, “A knowledge-assisted approach to parameterized reuse,” International Journal of Software Engineering and Knowledge Engineering, vol. 6, no. 4, pp. 641-71, Dec., 1996.

[1172] R. Biddle and E. Tempero, “Explaining inheritance: a code reusability perspective,” SIGCSE Bulletin (Association for Computing Machinery, Special Interest Group on Computer Science Education), 1996.

[1173] R. L. Biddle and E. D. Tempero, “Understanding the impact of language features on reusability,” International Conference on Software Reuse, 1996.

[1174] J. D. Biedermann, “Addressing current issues in structural design software,” Journal of Computing in Civil Engineering, 1996.

[1175] M. Biggs, “Penumbra's got its Mojo working for Java-based apps,” InfoWorld, pp. IW4 : Charts, 1996.

[1176] M. Biggs, “Visual Basic 5.0 subset easily controls ActiveX,” InfoWorld, pp. 101, 1996.

[1177] R. V. Binder, “Testing for reuse: libraries and frameworks,” Object Magazine, vol. 6, no. 6, pp. 77-80, Aug., 1996.

[1178] P. Binns, M. Englehart, M. Jackson, and S. Vestal, “Domain-specific software architectures for guidance, navigation and control,” International Journal of Software Engineering and Knowledge Engineering, vol. 6, no. 2, pp. 201-27, June, 1996.

[1179] B. A. Blake and P. Jalics, “An assessment of object-oriented methods and C++,” Journal of Object-Oriented Programming, vol. 9, no. 1, pp. 42-8, March-April, 1996.

[1180] B. F. Boczkaj, “Software aspects of integrating several separately controlled machines into one control system - PLC example,” Wescon Conference Record, 1996.

[1181] F. Bodendorf and K. Langer, “A system architecture for flexible, knowledge-based, multimedia CBT-applications [computer-based training],” International Journal of Engineering Education, vol. 12, no. 4, pp. 264-71, 1996.

[1182] B. Boehm and S. Wolf, “Open architecture for software process asset reuse,” Proceedings of the International Software Process Workshop, 1996.

[1183] R. J. Boeri and M. Hensel, “Hope for the SGML savant is near & far away,” CD-ROM Professional, pp. 49-50, 1996.

[1184] R. Boisvert, S. Browne, J. Dongarra, and E. Grosse, “Digital software and data repositories for support of scientific computing,” Digital Libraries. Research and Technology Advances. ADL '95 Forum. Selected Papers, pp. 103-14, 1996.

[1185] C. A. Boivie, “Making reuse the objective,” Informationweek, pp. 100, 1996.

[1186] B. Borchert and A. Lozano, “Succinct circuit representations and leaf language classes are basically the same concept,” Information Processing Letters, pp. 211-215 : Equations, 1996.

[1187] J. Borel, “System on silicon, Where are we?,” Proceedings. 14th IEEE VLSI Test Symposium (Cat. No.96TB100043), pp. XXVI, 1996.

[1188] J. Bosch, “Delegating compiler objects-an object-oriented approach to crafting compilers,” Compiler Construction. 6th International Conference, CC'96. Proceedings, pp. 326-40, 1996.

[1189] J. Bosch, C. Lundberg, and A. Hultgren, “Multiple object interfaces in object-oriented control systems,” Proceedings of the IEEE International Conference on Engineering of Complex Computer Systems, ICECCS, 1996.

[1190] P. L. Bossart, “Hypertools in image and volume visualization,” Proceedings of the Fourth Annual Tcl/Tk Workshop, pp. 221-30, 1996.

[1191] P. Bosshart and R. Bacher, “A domain architecture for solving simultaneous nonlinear network equations [power system simulation],” Proceedings of the 20th International Conference on Power Industry Computer Applications (Cat. No.97CH36013), pp. 142-8, 1996.

[1192] A. Bossi, M. Bugliesi, M. Gabbrielli, G. Levi, and M. C. Meo, “Differential logic programs: programming methodologies and semantics,” Science of Computer Programming, 1996.

[1193] R. Boutaba and K. Foughali, “Distributed open interworking in software engineering environments,” Integrated Computer-Aided Engineering, 1996.

[1194] B. Boutsinas, S. Papadimitriou, and G. Pavlides, “Automatic analysis, verification and synthesis of rule-based real-time decision-making systems with machine learning assistance,” Perspectives of System Informatics. Second International Andrei Ershov Memorial Conference. Proceedings, pp. 134-45, 1996.

[1195] T. S. Bowen, “RAD program extends app dev to Web,” InfoWorld, pp. 27, 1996.

[1196] T. S. Bowen, “Software testing tool vendors upgrade Unix, NT versions,” InfoWorld, pp. 40, 1996.

[1197] T. S. Bowen, “Sun brews up Java blend,” InfoWorld, pp. 1,24, 1996.

[1198] G. Bozas, M. Jaedicke, A. Listl, B. Mitschang, A. Reiser, and S. Zimmermann, “On transforming a sequential SQL-DBMS into a parallel one: first results and experiences of the MIDAS project,” Euro-Par '96 Parallel Processing. Second International Euro-Par Conference. Proceedings, pp. 881-6 vol.2, 1996.

[1199] M. Brandel, “The art and science of client/server,” Computerworld, pp. 16-22 : Charts, Graphs, 1996.

[1200] F. M. T. Brazier, P. H. G. van Langen, J. Treur, and N. J. E. Wijngaards, “Redesign and reuse in compositional knowledge-based systems,” Knowledge-Based Systems, vol. 9, no. 2, pp. 105-18, April, 1996.

[1201] Y. Bretecher, “A multi-function switch centered on the IN,” 4th International Conference on Intelligence in Networks, ICIN 96 Proceedings, pp. 349-50, 1996.

[1202] G. Brown and P. Forte, “Building reusable classes for frameworks,” Journal of Object-Oriented Programming, vol. 9, no. 7, pp. 49-54, Nov.-Dec., 1996.

[1203] K. Brown, “Experiencing patterns at the design level,” Object Magazine, vol. 5, no. 8, pp. 40, 42-8, Jan., 1996.

[1204] T. Bub and J. Schwinn, “VERBMOBIL: The evolution of a complex large speech-to-speech translation system,” International Conference on Spoken Language Processing, ICSLP, Proceedings, 1996.

[1205] K. Buchenrieder, A. Pyttel, and C. Veith, “Mapping statechart models onto an FPGA-based ASIP architecture,” Proceedings EURO-DAC '96. European Design Automation Conference with EURO-VHDL '96 and Exhibition (Cat. No.96CB36000), pp. 184-9, 1996.

[1206] J. R. Buffenbarger, “Interface translation for reuse of assembly-language modules in a two-language environment,” Hewlett-Packard Journal, 1996.

[1207] E. Burd, M. Munro, and C. Wezeman, “Analysing large COBOL programs: the extraction of reusable modules,” Conference on Software Maintenance, 1996.

[1208] E. Burd, M. Munro, and C. Wezeman, “Extracting reusable modules from legacy code: considering the issues of module granularity,” Reverse Engineering - Working Conference Proceedings, 1996.

[1209] H. Burkhart, R. Frank, and G. Hachler, “ALWAN: a skeleton programming language,” Coordination Languages and Models. First International Conference COORDINATION '96. Proceedings, pp. 407-10, 1996.

[1210] H. Burkhart, R. Frank, and G. Hachler, “Structured parallel programming: how informatics can help overcome the software dilemma,” Scientific Programming, 1996.

[1211] F. Buschmann, “Finding and using patterns. What kinds of patterns exist?,” Object Expert, vol. 1, no. 6, pp. 46-7, 61, Sept.-Oct., 1996.

[1212] F. Buschmann, “What is a pattern?,” Object Expert, vol. 1, no. 3, pp. 17-18, March-April, 1996.

[1213] C. Bussler, P. Heinl, S. Jablonski, H. Schuster, and K. Stein, “Architecture of work flow management systems usable throughout an undertaking,” Informationssyst.-Archit. (Germany), Informationssystem-Architekturen, vol. 3, no. 1, pp. 73-5, Sept., 1996.

[1214] A. Bykat, “Visualizing program concepts using EVA,” Proceedings of the Intersociety Energy Conversion Engineering Conference, 1996.

[1215] B. Bysinger, “Move to the networked model with OLE Automation, DCOM,” Health Management Technology, pp. 32-34, 1996.

[1216] K. Byung-Kyoo and J. M. Bieman, “Design-level cohesion measures: derivation, comparison, and applications,” Proceedings. The Twentieth Annual International Computer Software and Applications Conference (COMPSAC '96) (Cat. No.96CB35986), pp. 92-7, 1996.

[1217] C. J. Calabrese, “A tool for building firewall-router configurations,” Computing Systems, vol. 9, no. 3, pp. 239-53, Summer, 1996.

[1218] B. Caldwell, “Trading size 12 for a custom fit,” Informationweek, pp. 44, 1996.

[1219] M. Calha, J. P. Teixeira, and I. C. Teixeira, “HW/SW specification using OOM techniques,” Proceedings of the International Workshop on Rapid System Prototyping, 1996.

[1220] L. Cameron, C. Berman, S. Gossain, B. Henderson-Sellers, L. Hill, and R. Smith, “Perspectives on reuse,” SIGPLAN Notices (ACM Special Interest Group on Programming Languages), 1996.

[1221] D. L. Campbell, “Examining the SmartSockets toolkit,” Dr. Dobb's Journal, vol. 21, no. 7, pp. 74, 76-7, 84, July, 1996.

[1222] A. Camurri and A. Coglio, “A formalism for the synthesis of efficient controllers for discrete event systems,” Proceedings. 1996 IEEE Conference on Emerging Technologies and Factory Automation. EFTA '96, vol. 1, pp. 348-54, 1996.

[1223] G. Canfora, A. Cimitile, and A. De Lucia, “Specifying code analysis tools,” Conference on Software Maintenance, 1996.

[1224] G. Canfora, A. Cimitile, and M. Munro, “An improved algorithm for identifying objects in code,” Software - Practice and Experience, vol. 26, no. 1, pp. 25-48, Jan., 1996.

[1225] M. Capps, D. Stotts, J. Duff, and J. Purtilo, “Distributed interoperable virtual environments,” IEEE International Workshop on Configurable Distributed Systems-Proceedings, 1996.

[1226] L. F. Capretz and M. A. M. Capretz, “Reusing software to produce broadband services,” AFRICON '96. Incorporating AP-MTT-96 and COMSIG-96. 1996 IEEE AFRICON. 4th AFRICON Conference in Africa. Electrical Energy Technology, Communication Systems, Human Resources (Cat. No.96CH35866), pp. 771-5 vol.2, 1996.

[1227] A. C. Carlson, W. R. Brook, and C. L. F. Haynes, “Experiences with distributed objects,” AT&T Technical Journal, vol. 75, no. 2, pp. 58-67, March-April, 1996.

[1228] A. Carmichael, “Conformance versus inheritance,” Object Expert, vol. 1, no. 3, pp. 19-22, 25, March-April, 1996.

[1229] A. J. Carrott, D. A. Venables, A. A. West, C. D. Wright, R. Harrison, S. Garvey, and D. Wells, “The design of control systems for high speed machines,” IEE Colloquium on Physical Modelling as a Basis for Control, pp. 3/1-6, 1996.

[1230] E. E. Cashar, “Development of a TPS reuse library using COTS tools,” AUTOTESTCON (Proceedings), 1996.

[1231] S. Castano, G. Martella, and P. Samarati, “Analysis, comparison and design of role-based security specifications,” Data & Knowledge Engineering, vol. 21, no. 1, pp. 31-55, Dec., 1996.

[1232] R. A. Chambers, “Finding reusable components: By good luck or good management?,” Systematic Reuse: Issues in Initiating and Improving a Reuse Program. Proceedings of the International Workshop on Systematic Reuse, pp. 70-84, 1996.

[1233] K. Chanchio and S. Xian-He, “MpPVM: a software system for non-dedicated heterogeneous computing,” Proceedings of the 1996 International Conference on Parallel Processing. Vol.3 Software, pp. 215-22 vol.3, 1996.

[1234] L. Chee-Kit, A. V. Laud, S. M. Mishra, and Q. Hiok-Chai, “EPIGAME: a software environment for learning structures and strategies to guide inquiry,” 1996 IEEE International Conference on Systems, Man and Cybernetics. Information Intelligence and Systems (Cat. No.96CH35929), pp. 2113-18 vol.3, 1996.

[1235] H. Chen, Z. Qi, B. Wang, H. Ning, and Q. Tan, “Framework for rigorous software development,” Ruan Jian Xue Bao/Journal of Software, 1996.

[1236] J.-B. Chen and S. C. Lee, “Necessary and sufficient conditions of type-safe polymorphism,” Journal of Object-Oriented Programming, 1996.

[1237] S. Chen and T. S. Chow, “Information technology - best practices in design and development,” AT&T Technical Journal, 1996.

[1238] Y. Chen and J. S. Shieh, “KSL: a knowledge specification language for knowledge organization and representation,” Proceedings of the IASTED/ISMM International Conference. Intelligent Information Management Systems, pp. 207-10, 1996.

[1239] C. T. Chi, D. Okino, and B. McCleary, “Optimization of analysis methods for space shuttle orbiter RCC hardware,” Collection of Technical Papers - AIAA/ASME/ASCE/AHS Structures, Structural Dynamics & Materials Conference, 1996.

[1240] B. Childs and J. Sametinger, “Literate programming and documentation reuse,” International Conference on Software Reuse, 1996.

[1241] Y. S. Cho and D. L. Carver, “A model for software reuse,” Journal of Systems Integration, vol. 6, no. 3, pp. 181-201, Aug., 1996.

[1242] J. Choi, J. Demmel, I. Dhillon, J. Dongarra, S. Ostrouchov, A. Petitet, K. Stanley, D. Walker, and R. C. Whaley, “ScaLAPACK, a portable linear algebra library for distributed memory computers-design issues and performance,” Comput. Phys. Commun. (Netherlands), Computer Physics Communications, vol. 97, no. 1-2, pp. 1-15, 2, 1996.

[1243] S.-C. Chou, J.-Y. Chen, and C.-G. Chung, “Behavior-based classification and retrieval technique for object-oriented specification reuse,” Software - Practice and Experience, 1996.

[1244] S.-C. Chou, J.-Y. Chen, and C.-G. Chung, “An executable specification language for specification understanding in object-oriented specification reuse,” Information & Software Technology, pp. 419-434, 1996.

[1245] N. Chrisochoides, “Multithreaded model for the dynamic load-balancing of parallel adaptive PDE computations,” Applied Numerical Mathematics, 1996.

[1246] W. C. Chu and Y. Hongji, “A formal method to software integration in reuse,” Proceedings. The Twentieth Annual International Computer Software and Applications Conference (COMPSAC '96), pp. 343-8, 1996.

[1247] W. C. Chu, H. Yang, and P. Luker, “A formal method for software maintenance,” Proceedings. International Conference on Software Maintenance (Cat. No.96CB36002), pp. 206-16, 1996.

[1248] L. Chung-Horng, J. E. Urban, and G. T. Mackulak, “Incorporation of relational modeling method into object-oriented analysis,” 1995 IEEE International Conference on Communications. Converging Technologies for Tomorrow's Applications. ICC '96. Conference Record, vol. 1, pp. 198-202, 1996.

[1249] C. W. Church, “Technology issues of software reuse,” Systematic Reuse: Issues in Initiating and Improving a Reuse Program. Proceedings of the International Workshop on Systematic Reuse, pp. 64-9, 1996.

[1250] F. Ciceri and P. Massa, “Impacts and evaluations of a software reuse methodology for on board components development,” International Symposium on On-board Real-time Software ISOBRTS (ESA SP-375), pp. 223-8, 1996.

[1251] A. Cimitile, A. de Lucia, and M. Munro, “A specification driven slicing process for identifying reusable functions,” Journal of Sofware Maintenance: Research and Practice, vol. 8, no. 3, pp. 145-78, May-June, 1996.

[1252] J. C. Cleaveland, J. A. Fertig, and G. W. Newsome, “Dividing the software pie,” AT&T Technical Journal, 1996.

[1253] A. Clematis, B. Falcidieno, and M. Spagnuolo, “Parallel processing on heterogeneous networks for GIS applications,” International Journal of Geographical Information Systems, vol. 10, no. 6, pp. 747-67, Sept., 1996.

[1254] P. Clements, R. Krut, E. Morris, and K. Wallnau, “The Gadfly: an approach to architectural-level system comprehension,” Proceedings. Fourth Workshop on Program Comprehension, pp. 178-86, 1996.

[1255] A. Cohen and R. Mrabet, “Generic simulation models of communication systems,” Proceedings of the IEEE Annual Simulation Symposium, 1996.

[1256] S. Cohen, “Dynamic inheritance in C++,” C++ Report, vol. 8, no. 4, pp. 30-7, April, 1996.

[1257] P. Collins Cornwell, “HP domain analysis: producing useful models for reusable software,” Hewlett-Packard Journal, vol. 47, no. 4, pp. 46-55, Aug., 1996.

[1258] D. Conner, “Reconfigurable logic: hardware speed with software flexibility,” Edn, 1996.

[1259] R. Conradi, “Process support for reuse,” Proceedings of the International Software Process Workshop, 1996.

[1260] A. Cook and K. J. R. Hunt, “ARINC 653-achieving software re-use,” 1995 Avionics Conference and Exhibition. Low-Cost Avionics - can we afford it? (ERA Report 95-0364), pp. 183-90, 1996.

[1261] P. C. Cornwell, “HP domain analysis: producing useful models for reusable software,” Hewlett-Packard Journal, 1996.

[1262] D. J. Costello, E. S. Fraga, N. Skilling, G. H. Ballinger, R. Banares-Alcantara, J. Krabbe, D. M. Laing, R. C. McKinnel, J. W. Ponton, and M. W. Spenceley, “Support environment for process engineering software,” Computers & Chemical Engineering, 1996.

[1263] T. Costlow, “Software explosion rattles car makers,” Electronic Engineering Times, pp. 1,156+, 1996.

[1264] C. Cowan, T. Autrey, C. Krasic, C. Pu, and J. Walpole, “Fast concurrent dynamic linking for an adaptive operating system,” Proceedings. Third International Conference on Configurable Distributed Systems (Cat. No.96TB100046), pp. 108-15, 1996.

[1265] J. Cox, “Microsoft repository hits the beta stage,” Network World, pp. 12, 1996.

[1266] J. Cox, “New Intrinsa tool simulates workings of software components,” Network World, pp. 40 : Charts, 1996.

[1267] J. Cox, “Object databases boost Web clients,” Network World, pp. 32, 1996.

[1268] J. Cox, “Powersoft muscles into the Java market,” Network World, pp. 29, 1996.

[1269] J. Cox, “Sybase snaps up maker of reusable software objects for $28 million in stock,” Network World, pp. 29, 1996.

[1270] F. P. Coyle, “An introduction to Object-Oriented COBOL,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 55-61, 1996.

[1271] F. P. Coyle, “Smalltalk's Model-View-Controller architecture: the evolution of a design pattern,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 142-4, 1996.

[1272] J. Craig Cleaveland, J. A. Fertig, and G. W. Nowsome, “Dividing the software pie,” AT&T Technical Journal, vol. 75, no. 2, pp. 8-19, March-April, 1996.

[1273] J. Crnkovic and W. K. Holstein, “What ever happened to the "re" in object recycling,” Information Technology Management and Organizational Innovations. Proceedings of the 1996 Information Resources Management Association International Conference, pp. 442, 1996.

[1274] C. Cunningham, “Ives Development's objects will facilitate code reuse,” InfoWorld, pp. 36, 1996.

[1275] J. L. Cybulski, “Reuse in the eye of its beholder: cognitive factors in software reuse,” Proceedings Sixth Australian Conference on Computer-Human Interaction, pp. 228-35, 1996.

[1276] K. Czarnecki, R. Hanselmann, U. W. Eisenecker, and W. Koepf, “ClassExpert: a knowledge-based assistant to support reuse by specialization and modification in smalltalk,” International Conference on Software Reuse, 1996.

[1277] G. Da Bormida, D. Ponta, and G. Donzellini, “Learning environment for digital electronics,” Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, 1996.

[1278] M. F. da Silva and C. M. L. Werner, “Packaging reusable components using patterns and hypermedia,” International Conference on Software Reuse, 1996.

[1279] W. Dai, “Reusable expert system components development,” Applied Artificial Intelligence, 1996.

[1280] W. Dai, D. M. Zhang, and J. R. Crawford, “Reusable template for product database development,” Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, 1996.

[1281] D. J. Dailey, M. P. Haselkorn, and D. Meyers, “Structured approach to developing real-time, distributed network applications for ITS deployment,” ITS Journal, 1996.

[1282] K. Dallas, “AuthorDocs,” LAN Magazine, vol. 4, no. 3, pp. 37, March, 1996.

[1283] J. Daly, “ASAP legends : Tim Berners-Lee,” Forbes, pp. 64-65, 1996.

[1284] R. Darimont and A. van Lamsweerde, “Formal refinement patterns for goal-driven requirements elaboration,” Softw. Eng. Notes (USA), Software Engineering Notes, vol. 21, no. 6, pp. 179-90, Nov., 1996.

[1285] B. Darrow, “FutureTense : Internet publishing VARs key,” Computer Reseller News, pp. 65, 1996.

[1286] S. Datar and S. R. Schach, “Reuse of legacy software in object-oriented re-engineering: a case study,” Transactions of the South African Institute of Electrical Engineers, vol. 87, no. 3, pp. 101-7, Sept., 1996.

[1287] R. Davies, D. R. Wardell, P. May, and T. Wooding, “Techniques for developing reusable business components,” Journal of Object-Oriented Programming, vol. 9, no. 7, pp. 40-3, Nov.-Dec., 1996.

[1288] R. Davis, P. Samuelson, M. Kapor, and J. Reichman, “A new view of intellectual property and software,” Communications of the ACM, pp. 21-30, 1996.

[1289] R. E. Davis and R. L. Danielson, “Practically formal methods,” Proceedings. 1996 International Conference Software Engineering: Education and Practice, pp. 168-75, 1996.

[1290] D. De Judicibus, “Reuse: A cultural change,” Systematic Reuse: Issues in Initiating and Improving a Reuse Program. Proceedings of the International Workshop on Systematic Reuse, pp. 44-51, 1996.

[1291] C. J. P. de Lucena, J. C. S. do Prado Leite, J. R. Fernandes, M. Gheiner, and A. F. do Prado, “JSD/PUC: Um ambiente de software experimental para estudo do processo de automatizacao de desenvolvimento de software,” Controle & Automacao, 1996.

[1292] F. De Paoli, F. Tisato, and C. Bellettini, “HyperReal : A modular control architecture for HRT systems,” Journal of Systems Architecture, pp. 477-487 : Charts, 1996.

[1293] L. Delcambre and J. Langston, “Reusing (shrink wrap) schemas by modifying concept schemas,” Proceedings of the Twelfth International Conference on Data Engineering (Cat. No.96CB35888), pp. 326-33, 1996.

[1294] J. G. Dempsey, “VFB plus VFR equals very fast backup,” Computer Technology Review, pp. 62-67 : Charts, 1996.

[1295] P. Devanbu, S. Karstu, W. Melo, and W. Thomas, “Analytical and empirical evaluation of software reuse metrics,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 189-99, Mar. 25-30, 1996.

[1296] P. Dewan, “Multiuser architectures,” Engineering for Human-Computer Interaction. Proceedings of the IFIP TC2/WG2.7 Working Conference on Engineering for Human-Computer Interaction, pp. 247-70, 1996.

[1297] P. Di Felice and G. Fonzi, “On the role of automatic tools for software reuse: a testimony based on use experience,” Rivista di Informatica, vol. 26, no. 3, pp. 161-81, Sept.-Dec., 1996.

[1298] E. Di Nitto and A. Fuggetta, “Product lines: What are the issues?,” Proceedings of the International Software Process Workshop, 1996.

[1299] J. L. Diaz-Herrera, “Hierarchical modular diagrams: an approach to describe architectural designs,” Studies of Software Design. ICSE 93 Workshop. Selected Papers, pp. 140-50, 1996.

[1300] M. Dodani, “Browsing object interactions,” Report on Object Analysis and Design, vol. 2, no. 7, pp. 36-8, May-June, 1996.

[1301] G. Dodds, B. Cao, and K. Hamilton, “Multi-arm robotics: a solution to fast reconfiguration for changing automated tasks,” Industrial Robot, 1996.

[1302] J. Dongarra, “Future linear-algebra libraries,” IEEE Computational Science and Engineering, vol. 3, no. 2, pp. 38-40, Summer, 1996.

[1303] M. Doorley and A. Cahill, “Experiences in automatic levelling of data flow diagrams,” Proceedings. Fourth Workshop on Program Comprehension (Cat. No.96TB10033), pp. 218-29, 1996.

[1304] J. Dorn, M. Girsch, and N. Vidakis, “DEJA VU - a reusable framework for the construction of intelligent interactive schedulers,” Advances in Production Management Systems. Proceedings of the 6th IFIP TC5/WG5.7 International Conference on Advances in Production Management Systems - APMS'96, pp. 637-44, 1996.

[1305] S. Doublait and C. Lissoni, “Processes for systematic software reuse,” Proceedings of the International Software Process Workshop, 1996.

[1306] P. Dourish, “Consistency guarantees: Exploiting application semantics for consistency management in a collaboration toolkit,” Proceedings of the ACM Conference on Computer Supported Cooperative Work, 1996.

[1307] S. Drevik, “How to comment code,” Embedded Systems Programming, vol. 9, no. 3, pp. 58-60, 62, 64, March, 1996.

[1308] S. Drossopoulou, S. Karathanos, and D. Yang, “Type-checking smalltalk,” Journal of Object-Oriented Programming, 1996.

[1309] P. Dryden, “Web gives facelift to network management,” Computerworld, pp. 65, 1996.

[1310] J. W. Duff, J. Purtilo, M. Capps, and D. Stotts, “Software engineering of distributed simulation environments,” Proceedings of the 5th Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises (WET ICE '96) (96TB100058), pp. 262-7, 1996.

[1311] A. H. B. Duffy and S. M. Duffy, “Learning for design reuse,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 1996.

[1312] D. Duggan, G. Cormack, and J. Ophel, “Kinded type inference for parameteric overloading,” Acta Informatica, vol. 33, no. 1, pp. 21-68, 1996.

[1313] Z. Dukic and S. Loncaric, “An object-oriented implementation of morphological operations using element vector representation,” Journal of Computing and Information Technology - CIT, vol. 4, no. 4, pp. 265-9, Dec., 1996.

[1314] A. M. Durham and R. E. Johnson, “Framework for run-time systems and its visual programming language,” SIGPLAN Notices (ACM Special Interest Group on Programming Languages), 1996.

[1315] L. Dusink and L. Latour, “Controlling functional fixedness: the essence of successful reuse,” Knowledge-Based Systems, 1996.

[1316] R. M. Duwairi, N. J. Fiddian, and W. A. Gray, “Schema integration meta-knowledge classification and reuse,” Advances in Databases. 14th British National Conference on Databases. BNCOD 14. Proceedings, pp. 1-17, 1996.

[1317] P. Dvorak, “Get ready for software objects,” Machine Design, pp. 77-81 : Charts, 1996.

[1318] J. Dwyer, “Light at the end of integration's tunnel,” Manufacturing Computer Solutions, 1996.

[1319] T. V. Eaton and A. W. Gatian, “Organizational impacts of moving to object-oriented technology,” Journal of Systems Management, pp. 18-24 : Charts, Diagrams, 1996.

[1320] K. Ebizuka, I. Takahashi, K. Tatsumi, and H. Ohno, “Monitoring and control systems for thermal and hydroelectric power plants,” Mitsubishi Denki Giho, vol. 70, no. 7, pp. 38-43, 1996.

[1321] T. Ebling, “How Marcam is using OO frameworks in a new enterprise resource planning system,” I/S Analyzer, vol. 35, no. 3, pp. 7-12, March, 1996.

[1322] B. Ech-Cherif El Kettani, D. Ouazar, F. Benkhaldoun, J. P. Pecuchet, and M. Itmi, “Data management for an object-oriented finite volume dam-break model,” Proceedings of the International Conference on Computer Methods in Water Resources, CMWR, 1996.

[1323] B. Eckel, “C++ advisor: improving a design with patterns,” Unix Review, vol. 14, no. 7, pp. 55-6, 58, 60-1, June, 1996.

[1324] S. H. Edwards, “Representation inheritance: a safe form of "white box" code inheritance,” Proceedings Fourth International Conference on Software Reuse, pp. 195-204, 1996.

[1325] N. S. Eickelmann and D. J. Richardson, “An evaluation of software test environment architectures,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 353-64, 1996.

[1326] U. W. Eisenecker and T. Titze, “Flexible design, with examples in C++,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 237-47, 1996.

[1327] E. Ellmer and D. Merkl, “Classifying software process models based on natural language descriptions,” Proceedings. Seventh International Workshop on Database and Expert Systems Applications, pp. 320-5, 1996.

[1328] E. Ellmer and D. Merkl, “Considerations for an organizational memory in software development,” Proceedings of the International Software Process Workshop, 1996.

[1329] E. Ellmer, D. Merkl, G. Quirchmayr, and A. M. Tjoa, “Process model reuse to promote organizational learning in software development,” Proceedings - IEEE Computer Society's International Computer Software & Applications Conference, 1996.

[1330] S. M. Embury and P. M. D. Gray, “A modular compiler architecture for a data manipulation language,” Advances in Databases. 14th British National Conference on Databases. BNCOD 14. Proceedings, pp. 170-88, 1996.

[1331] M. Emrich, “Object framework for business applications,” Advances in Database Technology - EDBT 96. 5th International Conference on Extending Database Technology. Proceedings, pp. 617-20, 1996.

[1332] J. Estublier and S. Dami, “About reuse in multi-paradigm process modelling approach,” Proceedings of the International Software Process Workshop, 1996.

[1333] L. H. Etzkorn and C. G. Davis, “Automated object-oriented reusable component identification,” Knowledge-Based Systems, 1996.

[1334] L. H. Etzkorn, C. G. Davis, L. L. Bowen, D. B. Etzkorn, L. W. Lewis, B. L. Vinz, and J. C. Wolf, “A knowledge-based approach to object-oriented legacy code reuse,” Proceedings. Second IEEE International Conference on Engineering of Complex Computer Systems. Held jointly with 6th CSESAW, 4th IEEE RTAW, and SES'96, pp. 493-6, 1996.

[1335] C. Eun Hyuk and C. Cun Man, “Extraction and retrieval of C and C++ reuse components using reverse engineering,” Journal of KISS(C) (Computing Practices), vol. 2, no. 2, pp. 197-205, June, 1996.

[1336] J. Eusterbrock, “A multi-layer architecture for knowledge-based system synthesis,” Foundations of Intelligent Systems. 9th International Symposium, ISMIS '96. Proceedings, pp. 582-92, 1996.

[1337] W. M. Evanco, “Poisson models for subprogram defect analyses,” Achieving Quality in Software. Proceedings of the Third International Conference on Achieving Quality in Software, 1996, pp. 161-74, 1996.

[1338] D. Eyheramendy and T. Zimmermann, “Object oriented finite element programming: an interactive environment for symbolic derivations, application to an initial boundary value problem,” Advances in Engineering Software, vol. 27, no. 1-2, pp. 3-10, Oct.-Nov., 1996.

[1339] D. Eyheramendy and T. Zimmermann, “Object-oriented finite elements II. A symbolic environment for automatic programming,” Computer Methods in Applied Mechanics and Engineering, vol. 132, no. 3-4, pp. 277-304, 1, 1996.

[1340] R. Fabbretti, P. A. Dorsaz, P. A. Doriot, and W. Rutishauser, “Applying the object paradigm to a centralized database for a cardiology division,” Int. J. Bio-Med. Comput. (Ireland), International Journal of Bio-Medical Computing, vol. 42, no. 1-2, pp. 129-34, July, 1996.

[1341] J. C. Fabre and T. Perennou, “FRIENDS: a flexible architecture for implementing fault tolerant and secure distributed applications,” Dependable Computing - EDCC-2. Second European Dependable Computing Conference Proceedings, pp. 3-20, 1996.

[1342] T. Faison, “Examining Borland Delphi 2.0,” Dr. Dobbs Journal, vol. 21, no. 6, pp. 64, 66-7, 70-1, 87-8, June, 1996.

[1343] C. Farmer, “Object reusability,” InfoWorld, pp. 110-112, 1996.

[1344] C. Farmer, “A RADical approach,” InfoWorld, pp. 100-101, 1996.

[1345] P. A. Farrington, J. J. Swain, J. L. Evans, and J. S. Rogers, “Developing reusable modeling capabilities for simulating high volume electronics manufacturing systems,” IEEE Transactions on Components, Packaging, and Manufacturing Technology Part C: Manufacturing, 1996.

[1346] S. Faustle, M. G. Fugini, and E. Damiani, “Retrieval of reusable components using functional similarity,” Software - Practice and Experience, 1996.

[1347] J. Favaro, “A comparison of approaches to reuse investment analysis,” Proceedings Fourth International Conference on Software Reuse, pp. 136-45, 1996.

[1348] J. Favaro, “On the scalability problem in COTS-based programming environments,” Software Engineering Notes, vol. 21, no. 5, pp. 43-6, Sept., 1996.

[1349] J. Favaro, “Value based principles for management of reuse in the enterprise,” International Conference on Software Reuse, 1996.

[1350] W. Felser, W. Dangelmaier, E. Braune, and U. Schneider, “Building blocks of production planning and control,” Systems Analysis Modelling Simulation, 1996.

[1351] D. Fensel, H. Eriksson, M. A. Musen, and R. Studer, “Conceptual and formal specifications of problem-solving methods,” International Journal of Expert Systems, 1996.

[1352] J. A. Ferland, A. Hertz, and A. Lavoie, “An object-oriented methodology for solving assignment-type problems with neighborhood search techniques,” Operations Research, pp. 347-359, 1996.

[1353] C. Fernandez-Chamizo, P. A. Gonzalez-Calero, M. Gomez-Albarran, and L. Hernandez-Yanez, “Supporting object reuse through case-based reasoning,” Advances in Case-Based Reasoning. Third European Workshop, EWCBR-96. Proceedings, pp. 135-49, 1996.

[1354] G. Ferrari, G. Modoni, and P. Quaglia, “Towards a semantic-based verification environment for the pi -calculus,” Fifth Italian Conference on Theoretical Computer Science, pp. 451-65, 1996.

[1355] M. Ferreira da Silva and C. M. Lima Werner, “Packaging reusable components using patterns and hypermedia,” Proceedings Fourth International Conference on Software Reuse (Cat. No.96TB100015), pp. 146-55, 1996.

[1356] P. Fiore, F. Lanubile, and G. Visaggio, “Effort estimation for program comprehension,” Proceedings. Fourth Workshop on Program Comprehension (Cat. No.96TB10033), pp. 78-87, 1996.

[1357] D. G. Firesmith, “The PLOOT test pattern language,” Report on Object Analysis and Design, vol. 2, no. 7, pp. 53-6, May-June, 1996.

[1358] J. Fitzpatrick, “Redesigning a graphics test program using C++,” C++ Report, vol. 8, no. 6, pp. 54-60, June, 1996.

[1359] S. Flick, “An object-oriented framework for the realization of 3D geographic information systems,” Geographical Information from Research to Application Through Cooperation. Second Joint European Conference and Exhibition, pp. 187-96 vol.1, 1996.

[1360] E. S. Flint, “COBOL legacy programs serve the future,” American Programmer, vol. 9, no. 9, pp. 18-23, Sept., 1996.

[1361] J. Floch and B. Gulla, “Enabling reuse with a configuration language,” International Conference on Software Reuse, 1996.

[1362] G. Florijn and N. van Oosterom, “Object-orientation: what, why and how?,” Informatie, vol. 38, spec. issue., pp. 8-13, Feb., 1996.

[1363] J. Foley, “Focus on business objects,” Informationweek, pp. 51-53, 1996.

[1364] M. Foody, “If anything, get a strategy,” Computing Canada, pp. 40, 1996.

[1365] M. A. Foody, “The internetwork quandary,” Computing Canada, pp. 39, 1996.

[1366] M. A. Foody, “OLE and COM vs. CORBA,” UNIX Review, pp. 43-45, 1996.

[1367] J. P. Forestier, “Object-oriented client & RDBMS,” Databases Journal, pp. 8-26, March-April, 1996.

[1368] D. Forguson, “Developing the view component in MFC,” C++ Report, vol. 8, no. 6, pp. 67-74, 76, June, 1996.

[1369] D. Forguson, “Extending the MFC document template architecture,” C++ Report, vol. 8, no. 9, pp. 57-65, Oct., 1996.

[1370] D. Forguson, “Programming with the MFC document template architecture,” C++ Report, vol. 8, no. 3, pp. 36-41, March, 1996.

[1371] K. J. Fowler, “A software engineering design tool for modeling hard real-time performance,” International Journal of Software Engineering and Knowledge Engineering, vol. 6, no. 2, pp. 179-200, June, 1996.

[1372] W. Frakes and C. Terry, “Software reuse: metrics and models,” ACM Computing Surveys, vol. 28, no. 2, pp. 415-35, June, 1996.

[1373] W. B. Frakes and C. J. Fox, “Quality improvement using a software reuse failure modes model,” IEEE Transactions on Software Engineering, pp. 274-279 : Charts, Graphs, Equations, 1996.

[1374] X. Franch and X. Burgues, “Supporting incremental component programming with functional and non-functional information,” Proceedings. XVI International Conference of the Chilean Computer Science Society, pp. 212-22, 1996.

[1375] A. Frick, W. Zimmer, and W. Zimmermann, “Construction of robust and flexible class libraries,” Informatik Forschung und Entwicklung, vol. 11, no. 4, pp. 168-78, 1996.

[1376] O. Frick, “Multimedia conferencing systems as building blocks for complex cooperative applications,” Proceedings International Workshop on Multimedia Software Development, pp. 61-8, 1996.

[1377] S. Frost and P. Allen, “Pragmatic object modeling: developing user interface objects,” Journal of Object-Oriented Programming, 1996.

[1378] S. Frost and P. Allen, “A use-case approach to layering object models,” Report on Object Analysis and Design, vol. 2, no. 5, pp. 50-3, Jan.-Feb., 1996.

[1379] F. Fuchs, “How Germanys OERAG and SOFTPRO are using frameworks in the insurance industry,” I/S Analyzer, vol. 35, no. 3, pp. 2-7, March, 1996.

[1380] S. Fujita, K. Sugawara, T. Kinoshita, and N. Shiratori, “Agent-based architecture of distributed information processing systems,” Transactions of the Information Processing Society of Japan, vol. 37, no. 5, pp. 840-52, May, 1996.

[1381] N. Furmento and F. Baude, “SCHOONER: an object-oriented run-time support for distributed applications,” Proceedings of the ISCA International Conference. Parallel and Distributed Computing Systems, pp. 31-6 vol.1, 1996.

[1382] M. Furukawa, H. Sunaga, N. Kurihara, and M. Tomura, “Analysis of reusability of communication switching software based on C++ object-oriented design,” 1995 IEEE International Conference on Communications. Converging Technologies for Tomorrow's Applications. ICC '96. Conference Record, vol. 1, pp. 37-41, 1996.

[1383] L. Gaertner, “Object wrapping,” Object World UK '96, pp. 67-92, 1996.

[1384] D. Gage and J. Mardesich, “ActiveX standards process mired in politics, confusion,” Computer Reseller News, pp. 3,215, 1996.

[1385] R. Gaizauskas, H. Cunningham, Y. Wilks, P. Rodgers, and K. Humphreys, “GATE: an environment to support research and development in natural language engineering,” Proceedings. Eighth IEEE International Conference on Tools with Artificial Intelligence, pp. 58-66, 1996.

[1386] H. C. Gall, R. R. Klosch, and R. T. Mittermeir, “Using domain knowledge to improve reverse engineering,” International Journal of Software Engineering and Knowledge Engineering, vol. 6, no. 3, pp. 477-505, Sept., 1996.

[1387] S. Gallagher, “Gain from frame,” Informationweek, pp. 73-74, 1996.

[1388] S. Gallagher, “Oriented to objects,” Informationweek, pp. 74-76, 1996.

[1389] A. Ganapathiraju, L. Webster, J. Trimble, K. Bush, and P. Kornman, “Comparison of energy-based endpoint detectors for speech signal processing,” IEEE SOUTHEASTCON '96. Bringing Together Education, Science and Technology (Cat. No.96CH35880), pp. 500-3, 1996.

[1390] D. Gangopadhyay and S. Mitra, “Design by Framework Completion,” Automated Software Engineering, 1996.

[1391] J. Gao, C. Chen, Y. Toyoshima, D. Kung, and H. Pei, “Identifying polymorphism change and impact in object-orientated software maintenance,” Journal of Sofware Maintenance: Research and Practice, vol. 8, no. 6, pp. 357-87, Nov.-Dec., 1996.

[1392] D. Garrett, “Examining the Nutmeg class library,” Dr. Dobb's Journal, vol. 21, no. 10, pp. 80, 82, 84, 86, Oct., 1996.

[1393] F. Garzotto, L. Mainetti, and P. Paolini, “Information reuse in hypermedia applications,” Proceedings of the ACM Conference on Hypertext, 1996.

[1394] S. Gaudin, “ActiveX components ease Notes customization,” Computerworld, pp. 54, 1996.

[1395] S. Gaudin, “Components turn up Web wattage,” Computerworld, pp. 1,109, 1996.

[1396] S. Gaudin, “Unification, developer-style,” Computerworld, pp. 1,17, 1996.

[1397] P. Gautier, “Visitors revisited,” C++ Report, vol. 8, no. 8, pp. 36-9, 42-5, Sept., 1996.

[1398] P. Gee-Swee and C. Chye-Guan, “Modeling of the XOM/XMP application programming interface (API),” IEEE Communications Magazine, vol. 34, no. 8, pp. 134-44, Aug., 1996.

[1399] J. M. Geib, C. Gransart, C. Grenot, and P. Merle, “(Thread and Object)-oriented distributed programming,” Object-Based Parallel and Distributed Computation. France-Japan Workshop, OBPDC '95. Selected Papers, pp. 83-103, 1996.

[1400] V. Geisberg, “Don't waste code, reuse it,” Computing Canada, pp. 39, 1996.

[1401] A. Ghafoor, “High assurance systems engineering,” Proceedings. The Twentieth Annual International Computer Software and Applications Conference (COMPSAC '96) (Cat. No.96CB35986), pp. 396, 1996.

[1402] M. Gilbert, “Is Object COBOL a framework for reuse?,” Object Magazine, vol. 6, no. 3, pp. 42, 44, 46-7, May, 1996.

[1403] M. Gilbert, “Replace COBOL with objects? NOT!,” American Programmer, vol. 9, no. 9, pp. 11-17, Sept., 1996.

[1404] P. Gill, “Mastering objects,” Informationweek, pp. 1A-12A, 1996.

[1405] B. Gliss, “An Ada 95 harness for converting legacy FORTRAN applications,” Reliable Software Technologies - Ada-Europe '96. 1996 Ada-Europe International Conference on Reliable Software Technologies. Proceedings, pp. 413-26, 1996.

[1406] D. Goddard, “Delphi means RAD,” Info Canada, pp. 1,19+, 1996.

[1407] A. K. Goel, A. Gomez de Silva Garza, N. Grue, J. W. Murdock, M. M. Recker, and T. Govindaraj, “Towards design learning environments. I. Exploring how devices work,” Intelligent Tutoring Systems. Third International Conference, ITS '96. Proceedings, pp. 493-501, 1996.

[1408] J. Goguen, D. Nguyen, J. Meseguer, Luqi, D. Zhang, and V. Berzins, “Software component search,” Journal of Systems Integration, vol. 6, no. 1-2, pp. 93-134, March, 1996.

[1409] J. A. Goguen, “Parameterized programming and software architecture,” International Conference on Software Reuse, 1996.

[1410] A. Gokhale, D. C. Schmidt, T. Harrison, and G. Parulkar, “Operating system support for high-performance, real-time CORBA,” Proceedings of the Fifth International Workshop on Object-Orientation in Operating Systems (Cat. No.96TB100089), pp. 30-7, 1996.

[1411] B. Goldfedder and L. Rising, “A training experience with patterns,” Communications of the ACM, pp. 60-64, 1996.

[1412] H. Gomaa and G. A. Farrukh, “An approach for generating executable distributed applications from reusable software architectures,” Proceedings. Second IEEE International Conference on Engineering of Complex Computer Systems. Held jointly with 6th CSESAW, 4th IEEE RTAW, and SES'96 (Cat. No.96TB100082), pp. 442-9, 1996.

[1413] H. Gomaa and G. A. Farrukh, “Approach for generating executable distributed applications from reusable software architectures,” Proceedings of the IEEE International Conference on Engineering of Complex Computer Systems, ICECCS, 1996.

[1414] H. Gomaa, L. Kerschberg, V. Sugumaran, C. Bosch, I. Tavakoli, and L. O'Hara, “A knowledge-based software engineering environment for reusable software requirements and architectures,” Automated Software Engineering, vol. 3, no. 3-4, pp. 285-307, Aug., 1996.

[1415] D. R. Gonzales, “Tool reusable for DSP system emulation and board production testing,” Northcon - Conference Record, 1996.

[1416] F. Gonzalez-Vidal, M. Dekeyser, and G. Vazquez, “SARA: Software architecture for reuse in access,” Alcatel Telecommunications Review, pp. 221-8, 1996.

[1417] B. Grabot and P. Huguet, “Reference models and object-oriented method for reuse in production activity control system design,” Computers in Industry, pp. 17-31 : Charts, 1996.

[1418] I. Graham, “Hairies and conscripts: making reuse work,” Object Magazine, vol. 6, no. 6, pp. 82-3, Aug., 1996.

[1419] L. Graham, J. Bischof, and B. Henderson-Sellers, “Associations considered a bad thing [object modelling],” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 198-210, 1996.

[1420] N. A. B. Gray, “Teaching object orientation: patterns and reuse,” Proceedings 1996 Australian Software Engineering Conference, pp. 72-80, 1996.

[1421] C. Green, “Shrinking iostreams for embedded developers,” Embedded Systems Programming, vol. 9, no. 6, pp. 54-6, 59, 61-2, 64, 66, 68, 70, 72, 74, June, 1996.

[1422] J. Greenbaum, “Object catalog : The next challenge in object technology,” Software Magazine, pp. 49-50, 1996.

[1423] J. M. Greenbaum, “Grand ambitions,” Software Magazine, pp. 32-34+, 1996.

[1424] R. M. Greenwood, P. Kawalek, I. Robertson, and B. C. Warboys, “Asset view on the software process,” Proceedings of the International Software Process Workshop, 1996.

[1425] A. Griffiths, “An extended semantic foundation for Object-Z,” Proceedings. 1996 Asia-Pacific Software Engineering Conference, pp. 194-205, 1996.

[1426] M. L. Griss, “The reuse-driven software engineering business,” Object Magazine, vol. 6, no. 10, pp. 67-8, 70, Dec., 1996.

[1427] M. L. Griss and R. R. Kessler, “Building object-oriented instrument kits,” Object Magazine, vol. 6, no. 2, pp. 71-4, 77-81, April, 1996.

[1428] S. Grissom, “UisGL: a C++ library to support graphics education,” Computer Graphics, vol. 30, no. 3, pp. 36-7, Aug., 1996.

[1429] L. Groenewegen and G. Engels, “Reuse of software process fragments is reuse of software too,” Proceedings of the International Software Process Workshop, 1996.

[1430] E. Grosse, “Network programming and CSE,” IEEE Computational Science and Engineering, vol. 3, no. 2, pp. 40-1, Summer, 1996.

[1431] H. Grunder and K. Geihs, “Reuse and inheritance in distributed object systems,” Trends in Distributed Systems, CORBA and Beyond. International Workshop TreDS'96 Proceedings, pp. 191-9, 1996.

[1432] R. Guerraoui, “Strategic directions in object-oriented programming,” ACM Computing Surveys, pp. 691-700, 1996.

[1433] F. Guidec, “Object-oriented parallel software components for supercomputing,” Parallel Computing: State-of-the-Art and Perspectives, pp. 247-54, 1996.

[1434] W. Gunther, G. von der Straten, and J. Totzke, “Applying object oriented reuse techniques to switching system software,” ITG-Fachber. (Germany), ITG-Fachberichte, pp. 187-94, 1996.

[1435] Z. Guojun, D. Nute, and M. Rauscher, “DSSTOOLS: a toolkit for development of decision support systems in PROLOG,” Sixth International Conference on Computers in Agriculture, pp. 541-7, 1996.

[1436] G. Hachler and H. Burkhart, “Implementing the ALWAN communication and data distribution library using PVM,” Parallel Virtual Machine - EuroPVM '96. Third European PVM Conference Proceedings, pp. 243-50, 1996.

[1437] Y. Hagi, M. Sonehara, and H. Chiba, “Hitachi's object-oriented system development methodology,” Hitachi Review, vol. 45, no. 3, pp. 119-24, June, 1996.

[1438] D. Hagimont, J. Mossiere, X. R. de Pina, and F. Saunier, “Hidden software capabilities,” Proceedings - International Conference on Distributed Computing Systems, 1996.

[1439] T. Hagiwara and T. Katayama, “Generating a software repository system by object-oriented attribute grammars,” Transactions of the Information Processing Society of Japan, vol. 37, no. 12, pp. 2362-75, Dec., 1996.

[1440] S. Halasey, “Advancing technologies put device software on the fast track,” Medical Device and Diagnostic Industry, 1996.

[1441] M. Halpern, “Matra's development framework,” Computer-aided Engineering, pp. 74, 1996.

[1442] H.-S. Ham, S.-C. Jeong, and Y.-H. Kim, “Real-time shop floor control system for PCB auto-insertion line based on object-oriented approach,” Computers & Industrial Engineering, 1996.

[1443] J. Hamilton, “Interlanguage object sharing with SOM,” Proceedings of the Second USENIX Conference on Object-Oriented Technologies and Systems (COOTS), pp. 35-51, 1996.

[1444] J. Hamilton, “Reusing binary objects with DirectToSOM C++,” C++ Report, vol. 8, no. 3, pp. 42-51, March, 1996.

[1445] J. A. Hamilton, Jr., G. R. Ratterree, P. C. Brutch, and U. W. Pooch, “Public domain tools for modeling and simulating computer networks,” Simulation, 1996.

[1446] N. Hamza, F. Lovecchio, and J. C. Puybaret, “Modelling the bank with objects,” Rivista di Informatica, vol. 26, no. 2, pp. 81-98, May-Aug., 1996.

[1447] C. Hanachi, “Cooperative information system to support multi-expert systems development,” Expert Systems with Applications, 1996.

[1448] M. Hanna, “Is Cobol a relic?,” Software Magazine, pp. 60-69 : Charts, Graphs, 1996.

[1449] H. Hanselmann, “Hardware-in-the-loop simulation testing and its integration into a CACSD toolset,” Proceedings of the IEEE International Symposium on Computer-Aided Control System Design, 1996.

[1450] T. Haque, “"Process" takes on new life,” Computing Canada, pp. 45, 1996.

[1451] C. Harris and B. Buxton, “GP-COM: a distributed, component-based genetic programming system in C++,” Genetic Programming. Proceedings of the First Annual Conference 1996, pp. 425, 1996.

[1452] R. Harrison, L. G. Smaraweera, M. R. Dobie, and P. H. Lewis, “Comparing programming paradigms: an evaluation of functional and object-oriented programs,” Software Engineering Journal, vol. 11, no. 4, pp. 247-54, July, 1996.

[1453] M. J. Harrold and G. Rothermel, “Separate computation of alias information for reuse,” IEEE Transactions on Software Engineering, pp. 442-460 : Charts, Equations, 1996.

[1454] F. Hartanto, W. Kreutzer, K. Pawlikowski, and H. R. Sirisena, “Quantitative stochastic simulation of telecommunication networks in DESC plus plus,” Computers & Electrical Engineering, 1996.

[1455] D. Harvey, “Effective STL,” Object Expo Europe - Java Expo Conference Proceedings, pp. 181-92, 1996.

[1456] J. G. Harvey and C. D. Marlin, “A layered operational model for describing inter-tool communication in tool integration frameworks,” Proceedings 1996 Australian Software Engineering Conference, pp. 55-63, 1996.

[1457] C. R. Haske, “Taking advantage of inheritance in SAS/AF applications,” Proceedings of the Twenty-First Annual SAS Users Group International Conference, SUGI 21, pp. 11-16 vol.1, 1996.

[1458] S. B. Hassen, I. Athanasiu, and H. E. Bal, “A flexible operation execution model for shared distributed objects,” SIGPLAN Not. (USA), SIGPLAN Notices, vol. 31, no. 10, pp. 30-50, Oct., 1996.

[1459] S. Hauptmann and J. Wasel, “On-line maintenance with on-the-fly software replacement,” Proceedings. Third International Conference on Configurable Distributed Systems (Cat. No.96TB100046), pp. 70-80, 1996.

[1460] A. M. Hayashi, “Cyberspace Kmarts for software components?,” Datamation, pp. 16, 1996.

[1461] C. C. Hayes and D. M. Gaines, “Operator construction for re-usable planners in complex practical domains,” International Journal of Expert Systems Research and Applications, vol. 9, no. 3, pp. 383-408, 1996.

[1462] F. Hayes, “Chrysler opts for (Win) '95 model,” Computerworld, pp. 1,115, 1996.

[1463] F. Hayes, “From the ground up,” Computerworld, pp. 62, 1996.

[1464] F. Hayes, “The reality of object reuse,” Computerworld, pp. 62, 1996.

[1465] I. J. Hayes, “Supporting module reuse in refinement,” Science of Computer Programming, 1996.

[1466] B. Hayes-Roth and J. E. Larsson, “A domain-specific software architecture for a class of intelligent patient monitoring agents,” Journal of Experimental and Theoretical Artificial Intelligence, vol. 8, no. 2, pp. 149-71, April-June, 1996.

[1467] T. Hee Beng Kuan and L. Tok Wang, “Components reuse for data-intensive business programs through an object-oriented architecture,” Journal of Systems and Software, vol. 34, no. 1, pp. 3-20, July, 1996.

[1468] T. Hee Beng Kuan and L. Tok Wang, “Slicing functional components from data-intensive business programs,” Proceedings. The Twentieth Annual International Computer Software and Applications Conference (COMPSAC '96) (Cat. No.96CB35986), pp. 384-8, 1996.

[1469] P. Heinckiens, H. Tromp, and G. Hoffman, “Managing the complexity of client/server software,” Object Expo Europe - Java Expo Conference Proceedings, pp. 255-61, 1996.

[1470] M. Heitz, “Achieving reusable and reliable client-server code using HOOD automated code generation for ADA95 and C++ targets,” Ada in Europe. Second International Eurospace - Ada Europe Symposium. Proceedings, pp. 419-38, 1996.

[1471] J. Helfman, “Dotplot patterns: a literal look at pattern languages,” Theory and Practice of Object Systems, 1996.

[1472] J. Heliotis, “Eiffel in computer science education,” Journal of Object-Oriented Programming, 1996.

[1473] D. Hemer and P. Lindsay, “The CARE toolset for developing verified programs from formal specifications,” Proceedings of the Fourth International Symposium on Assessment of Software Tools, pp. 24-35, 1996.

[1474] O. Henniger, M. Barbeau, and B. Sarikaya, “Specification and testing of the behavior of network management agents using SDL-92,” IEEE/ACM Transactions on Networking, vol. 4, no. 6, pp. 951-61, Dec., 1996.

[1475] S. Henninger, “Accelerating the successful reuse of problem solving knowledge through the domain lifecycle,” International Conference on Software Reuse, 1996.

[1476] S. Henninger, “Building an organization-specific infrastructure to support CASE tools,” Automated Software Engineering, vol. 3, no. 3-4, pp. 239-59, Aug., 1996.

[1477] S. Henninger, “Supporting software development with organizational memory tools,” International Journal of Applied Software Technology, vol. 2, no. 1, pp. 61-84, 1996.

[1478] S. Henninger, “Supporting the construction and evolution of component repositories,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 279-88, 1996.

[1479] A. Herbert, “Hierarchical test coverage,” Proceedings - IEEE International Verilog HDL Conference, 1996.

[1480] C. Heung Seok and K. Yong Rae, “Assessing and restructuring of classes based on cohesion,” Proceedings. 1996 Asia-Pacific Software Engineering Conference, pp. 76-82, 1996.

[1481] V. S. Hibdon and T. C. Hartrum, “An Air Force organization process model using formal software engineering techniques,” Proceedings of the IEEE 1996 National Aerospace and Electronics Conference NAECON 1996 (Cat. No.96CH35934), pp. 482-9 vol.2, 1996.

[1482] T. Hinrichs, R. Bareiss, L. Birnbaum, and G. Collins, “Interface design tool based on explicit task models,” Conference on Human Factors in Computing Systems - Proceedings, 1996.

[1483] R. Hitchings and M. Martinez, “Reuse of process elements - one company's experience,” Proceedings of the International Software Process Workshop, 1996.

[1484] M. Hitz, “Measuring reuse attributes in object-oriented systems,” OOIS '95. 1995 International Conference on Object Oriented Information Systems Proceedings, pp. 19-38, 1996.

[1485] T. Hoffman, “BankAmerica branches out,” Computerworld, pp. 12, 1996.

[1486] K. Hogan, “Unzipping the recognition undergrowth,” Imaging Magazine, vol. 5, no. 12, pp. 68-9, 71-6, Dec., 1996.

[1487] C. Hollenbach and W. Frakes, “Software process reuse in an industrial setting,” International Conference on Software Reuse, 1996.

[1488] C. R. Hollenbach, “Experiences in process domain engineering at PRC Inc,” Proceedings of the International Software Process Workshop, 1996.

[1489] A. A. Holzbacher, “A software environment for concurrent coordinated programming,” Coordination Languages and Models. First International Conference COORDINATION '96. Proceedings, pp. 249-66, 1996.

[1490] U. Holzle and D. Ungar, “Reconciling responsiveness with performance in pure object-oriented languages,” ACM Transactions on Programming Languages and Systems, vol. 18, no. 4, pp. 355-400, July, 1996.

[1491] B. Holzmuller, “Extending the object-orientedness of Ada 95,” Reliable Software Technologies - Ada-Europe '96. 1996 Ada-Europe International Conference on Reliable Software Technologies. Proceedings, pp. 357-69, 1996.

[1492] N. Hondo, H. Iba, and Y. Kakazu, “COAST: an approach to robustness and reusability in genetic programming,” Genetic Programming. Proceedings of the First Annual Conference 1996, pp. 429, 1996.

[1493] N. Hondo, H. Iba, and Y. Kakazu, “Sharing and refinement for reusable subroutines of genetic programming,” Proceedings of the IEEE Conference on Evolutionary Computation, 1996.

[1494] J. Hong and X. Castellani, “Migration of characteristics of classes: a new concept to specify an object system evolution,” Information Technology Management and Organizational Innovations. Proceedings of the 1996 Information Resources Management Association International Conference, pp. 440-1, 1996.

[1495] J. Hong, G. Toye, and L. J. Leifer, “Engineering design notebook for sharing and reuse,” Computers in Industry, 1996.

[1496] C. L. Hoover and P. K. Khosla, “An analytical approach to change for the design of reusable real-time software,” Proceedings of WORDS'96. The Second Workshop on Object-Oriented Real-Time Dependable Systems, pp. 144-51, 1996.

[1497] M. Hori and T. Yoshida, “SCOOP: an object-oriented framework for production scheduling systems,” Advances in Production Management Systems. Proceedings of the 6th IFIP TC5/WG5.7 International Conference on Advances in Production Management Systems - APMS'96, pp. 389-94, 1996.

[1498] R. S. Hornstein, D. J. Hei, Jr., and I. E. Cureton-Snead, “Fundamental reusables for enterprise deployment a radical look at customer service,” Wescon Conference Record, 1996.

[1499] H. Ho-Sang, J. Seok-Chan, and K. Young-Hui, “Real-time shop floor control system for PCB auto-insertion line based on object-oriented approach,” Computers & Industrial Engineering, vol. 30, no. 3, pp. 543-55, July, 1996.

[1500] S. Ho-Yong, P. Ho-Jin, K. Han-Kyoung, and K. Yeon-Seal, “An object behavior control algorithm for ATM switching software,” Journal of KISS(C) (Computing Practices), vol. 2, no. 2, pp. 218-24, June, 1996.

[1501] S. Ho-Young, P. Ho-Jin, and K. Han-Kyung, “Scenario socket architecture model for ATM switching software,” ICCT'96. 1996 International Conference on Communication Technology Proceedings (Cat. No.96TH8118), pp. 513-16 vol.1, 1996.

[1502] W. Huaiqing, “Repositories for co-operative information systems,” Information and Software Technology, vol. 38, no. 5, pp. 333-41, May, 1996.

[1503] Y. Huang, C. M. R. Kintala, L. Bernstein, and W. Yi-Min, “Components for software fault tolerance and rejuvenation,” AT&T Technical Journal, vol. 75, no. 2, pp. 29-37, March-April, 1996.

[1504] T. Huan-Wen, “The design of distance-learning service creation environment,” Technology-Based Re-Engineering. Engineering Education. Proceeding of Frontiers in Education FIE'96 26th Annual Conference (Cat. No.96CH35946), pp. 1347-51 vol.3, 1996.

[1505] K. E. Huff, “Effect of product lines on current process technology,” Proceedings of the International Software Process Workshop, 1996.

[1506] J. Hummes and W. Gerteis, “Migrating from ISODE/ROSE to DCE/RPC: a common interface and a compiler,” Distributed Platforms. Proceedings of the IFIP/IEEE International Conference on Distributed Platforms: Client/Server and Beyond: DCE, CORBA, ODP and Advanced Distributed Applications (IEEE Cat.No.96TH8167), pp. 130-43, 1996.

[1507] M. Hunt and J. A. Rowson, “Blocking in a system on a chip,” IEEE Spectrum, pp. 35-41 : Charts, Graphs, 1996.

[1508] H. Inamori, K. Ueda, and T. Kishi, “Platform techniques of TMN for large-scale communication systems development with distributed node systems,” Conference Record / IEEE Global Telecommunications Conference, 1996.

[1509] T. Isakowitz and R. J. Kauffman, “Supporting search for reusable software objects,” IEEE Transactions on Software Engineering, pp. 407-423 : Charts, 1996.

[1510] B. Isenstein, M. Krueger, and A. Pool, “Middleware for realtime multicomputer tool development,” 1996 IEEE International Conference on Acoustics, Speech, and Signal Processing Conference Proceedings (Cat. No.96CH35903), pp. 1264-7 vol. 2, 1996.

[1511] H. Ishikawa, S. Majima, and N. Akiyama, “Inter-object communication platform in distributed operation system,” NOMS 96. 1996 IEEE Network Operations and Management Symposium (Cat. No.96CH35757), pp. 165-74 vol.1, 1996.

[1512] S. Isoda, “Software reuse in Japan,” Information & Software Technology, pp. 165-171, 1996.

[1513] V. Issarny and C. Bidan, “Aster: a CORBA-based software interconnection system supporting distributed system customization,” Proceedings. Third International Conference on Configurable Distributed Systems, pp. 194-201, 1996.

[1514] V. Issarny and C. Bidan, “Aster: a framework for sound customization of distributed runtime systems,” Proceedings of the 16th International Conference on Distributed Computing Systems (Cat. No.96CB35954), pp. 586-93, 1996.

[1515] V. Ivannikov, V. Zadorozhny, R. Kossmann, and B. Novikov, “Efficient metaobject control using mediators,” Perspectives of System Informatics. Second International Andrei Ershov Memorial Conference. Proceedings, pp. 310-29, 1996.

[1516] M. L. Jaccheri, “Reusing software process models in E**3,” Proceedings of the International Software Process Workshop, 1996.

[1517] D. Jackson and M. Jackson, “Problem decomposition for reuse,” Software Engineering Journal, 1996.

[1518] A. Jain, “Projections of logic programs using symbol mappings,” Logic Programming. Proceedings of the Twelfth International Conference on Logic Programming, pp. 483-96, 1996.

[1519] W. Jakoby, “Construction of reusable control programs with configurable binary fields and fields of Petri nets,” Automatisierungstechnische Praxis, vol. 38, no. 6, pp. 24-6, 29-30, 32, June, 1996.

[1520] W. M. Jakubowski, “AN/BQG-5A wide aperture array,” Sea Technology, 1996.

[1521] G. James, D. Roach, B. Hansche, R. Meza, and N. Robinson, “Health monitoring studies on composite structures for aerospace applications,” Proceedings of the International Conference on Engineering, Construction, and Operations in Space, 1996.

[1522] E. Jandourek, “A model for platform development,” Hewlett-Packard Journal, vol. 47, no. 4, pp. 56-71, Aug., 1996.

[1523] S. Jarzabek, “Common sense reuse,” Proceedings. 1996 Asia-Pacific Software Engineering Conference, pp. 330, 1996.

[1524] C. Jian and C. Iwan Tjuwito, “The Hierarchical Dependence Diagram: improving design for reuse in object-oriented software development,” Proceedings 1996 Australian Software Engineering Conference, pp. 155-66, 1996.

[1525] M. Jianhao and C. Shih-Fu, “Tools for compressed-domain video indexing and editing,” Proc. SPIE - Int. Soc. Opt. Eng. (USA), Proceedings of the SPIE - The International Society for Optical Engineering, vol. 2670, pp. 180-91, 1996.

[1526] K. Ji-Hong and S. Yong-Jae, “A language for the reuse of domain analysis information,” Journal of KISS(B) (Software and Applications), vol. 23, no. 1, pp. 64-74, Jan., 1996.

[1527] H. Jilong, C. Hui, M. Ohmori, B. H. Far, and Z. Koono, “Software creation: an intelligent CASE tool experiment for switching software,” ICCT'96. 1996 International Conference on Communication Technology Proceedings (Cat. No.96TH8118), pp. 961-4 vol.2, 1996.

[1528] K. Jin-Oh and C. Hee-Sook, “An object-oriented application framework for DANS management,” Global Information Infrastructure (GII) Evolution. Interworking Issues, pp. 417-26, 1996.

[1529] H. John and G. Spiros-Theodoros, “Reuse concepts and a reuse support repository,” Proceedings IEEE Symposium and Workshop on Engineering of Computer-Based Systems (Cat. No.96TB100022), pp. 27-34, 1996.

[1530] C. S. Johnson, “Teaching software development: a case history,” Software Engineering in Higher Education II. Second International Conference on Software Engineering in Higher Education, SEHE 95, pp. 51-9, 1996.

[1531] D. M. Johnson, “The systems engineer and the software crisis,” SIGSOFT Software Engineering Notes, vol. 21, no. 2, pp. 64-73, March, 1996.

[1532] C. Jones, “Economics of software process improvement,” Computer, 1996.

[1533] S. R. Joshi and W. W. McMillan, “Case based reasoning approach to creating user interface components,” Conference on Human Factors in Computing Systems - Proceedings, 1996.

[1534] N. Josuttis, “The truth about inheritance in C++,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 73-81, 1996.

[1535] L. Jourda, X. Joulia, and B. Koehret, “Introducing ATOM, the applied thermodynamics object-oriented model,” Comput. Chem. Eng. (UK), Computers & Chemical Engineering, vol. 20, pt.A, suppl.is, pp. S157-64, 1996.

[1536] J. Ju and M. U. Hosain, “Finite-element graphic objects in C plus plus,” Journal of Computing in Civil Engineering, 1996.

[1537] L. Jun and L. Chengzao, “TMN and object-oriented technology,” ICCT'96. 1996 International Conference on Communication Technology Proceedings (Cat. No.96TH8118), pp. 412-15 vol.1, 1996.

[1538] L. O. Jundt, M. G. Ott, and A. P. Dove, “Object oriented approach to control strategies,” Advances in Instrumentation and Control : International Conference and Exhibition, 1996.

[1539] A. Jung-Ho, L. Kang-Woo, S. Ha-Joo, and K. Hyoung-Joo, “Soprano: design and implementation of object storage system,” Journal of KISS(C) (Computing Practices), vol. 2, no. 3, pp. 243-55, Sept., 1996.

[1540] T. Jurcak, “Test programming in an ABBET signal-oriented environment,” AUTOTESTCON (Proceedings), 1996.

[1541] N. Juristo and E. Tovar, “Presence of software engineering in Spanish university computer science curriculums,” Software Engineering in Higher Education II. Second International Conference on Software Engineering in Higher Education, SEHE 95, pp. 161-76, 1996.

[1542] J. L. B. Justo, “A repository to support requirement specifications reuse,” Proceedings 1996 Information Systems Conference of New Zealand, pp. 53-62, 1996.

[1543] L. Jyhjong, D. C. Kung, and H. Pei, “Object-oriented specification and formal verification of real-time systems,” Annals of Software Engineering, vol. 2, pp. 161-98, 1996.

[1544] J. B. Kain, “Components: the basics,” Object Magazine, vol. 6, no. 2, pp. 64-9, April, 1996.

[1545] B.-K. Kang and J. M. Bieman, “Design-level cohesion measures: derivation, comparison, and applications,” Proceedings - IEEE Computer Society's International Computer Software & Applications Conference, 1996.

[1546] F. Kapsner, “System theoretic aspects of software architectures,” Computer Aided Systems Theory - EUROCAST 95. A Selection of Papers from the Fifth International Workshop on Computer Aided Systems Theory. Proceedings, pp. 175-80, 1996.

[1547] D. Kapur and M. Subramaniam, “Mechanically verifying a family of multiplier circuits,” Computer Aided Verification. 8th International Conference, CAV '96. Proceedings, pp. 135-46, 1996.

[1548] N. Katic, B. Nevstrujev, D. Vogel, and M. O. Pendergast, “Bridging the gap between structured requirements and object-oriented analysis and design,” Proceedings of the Twenty-Ninth Hawaii International Conference on System Sciences, pp. 525-35 vol.3, 1996.

[1549] R. Kazman, “Tool support for architecture analysis and design,” International Software Architecture Workshop, Proceedings, ISAW, 1996.

[1550] R. Kazman and J. Carriere, “Rapid prototyping of information visualizations using VANISH,” Proceedings of the Information Visualization Conference, 1996.

[1551] B. Keepence, C. McCausland, and M. Mannion, “A new method for identification of reusable software components,” Proceedings IEEE Symposium and Workshop on Engineering of Computer-Based Systems (Cat. No.96TB100022), pp. 35-42, 1996.

[1552] M. I. Kellner, “Connecting reusable software process elements and components,” Proceedings of the International Software Process Workshop, 1996.

[1553] S. Kelly, K. Lyytinen, and M. Rossi, “MetaEdit+: a fully configurable multi-user and multi-tool CASE and CAME environment,” Advanced Information Systems Engineering. 8th International Conference, CAiSE '96. Proceedings, pp. 1-21, 1996.

[1554] S. J. Kenny, “Useful SAS/GRAPH tools for a production environment,” Proceedings of the Twenty-First Annual SAS Users Group International Conference, SUGI 21, pp. 836-43 vol.1, 1996.

[1555] U. Kernebeck, “Component libraries for software re-use,” Conference Volume. 1996 Avionics Conference and Exhibition, pp. 11 pp., 1996.

[1556] A. I. Khan and M. Isreb, “Client-server adaptive finite element analysis-a distributed heterogenous computing approach on the World Wide Web,” Advances in Computational Structures Technology, pp. 219-25, 1996.

[1557] E. H. Khan and M. R. Girgis, “The effect of OO life cycle on software project management,” IEMC 96 Proceedings. International Conference on Engineering and Technology Management. Managing Virtual Enterprises: A Convergence of Communications, Computing, and Energy Technologies, pp. 233-40, 1996.

[1558] T. M. Khoshgoftaar, E. B. Allen, N. Goel, A. Nandi, and J. McMullan, “Detection of software modules with high debug code churn in a very large legacy system,” Proceedings of the International Symposium on Software Reliability Engineering, ISSRE, 1996.

[1559] T. M. Khoshgoftaar, E. B. Allen, K. S. Kalaichelvan, and N. Goel, “Early quality prediction: a case study in telecommunications,” IEEE Software, 1996.

[1560] T. M. Khoshgoftaar, E. B. Allen, K. S. Kalaichelvan, and N. Goel, “The impact of software evolution and reuse on software quality,” Empirical Software Engineering, vol. 1, no. 1, pp. 31-44, 1996.

[1561] R. B. Kieburtz, L. McKinney, J. M. Bell, J. Hook, A. Kotov, J. Lewis, D. P. Oliva, T. Sheard, I. Smith, and L. Walton, “A software engineering experiment in software component generation,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 542-52, 1996.

[1562] M. Kilian, “Interpreting C++: making reusability dynamic,” Object Magazine, vol. 6, no. 4, pp. 38, 42-3, June, 1996.

[1563] H. Kilov and I. Simmonds, “Business patterns and viewpoints,” International Workshop on Multiple Perspectives in Software Development, Proceedings, 1996.

[1564] H. Kim and C. Boldyreff, “An approach to increasing software component reusability in Ada,” Reliable Software Technologies - Ada-Europe '96. 1996 Ada-Europe International Conference on Reliable Software Technologies. Proceedings, pp. 89-100, 1996.

[1565] I. Kim, T. Carnduff, A. Gray, and J. Miles, “DESCRIBE: an object-oriented design system to support concurrent reuse of data in building and engineering design,” OOIS '95. 1995 International Conference on Object Oriented Information Systems Proceedings, pp. 39-44, 1996.

[1566] S. O. Kimbrough and W. J. Vachula, “A propaedeutic on logic for object-oriented systems analysis and design,” Proceedings of the Twenty-Ninth Hawaii International Conference on System Sciences, pp. 20-9 vol.2, 1996.

[1567] D. Kirkpatrick, “Cultural barriers,” OTC '96. Object Technology Centers. Conference Proceedings, pp. 171-3, 1996.

[1568] R. Kiyeol, “A synchronization scheme for effective support of inheritance in concurrent object-oriented languages,” Journal of KISS(B) (Software and Applications), vol. 23, no. 1, pp. 1-13, Jan., 1996.

[1569] J. Kleindienst, F. Plasil, and P. Tuma, “Lessons learned from implementing the CORBA Persistent Object Service,” SIGPLAN Not. (USA), SIGPLAN Notices, vol. 31, no. 10, pp. 150-67, Oct., 1996.

[1570] C. D. Klingler and R. Creps, “Integrating and applying processes and methods for product line management,” Proceedings of the International Software Process Workshop, 1996.

[1571] C. D. Klingler and J. Solderitsch, “DAGAR: a process for domain architecture definition and asset implementation,” Proceedings TRI-Ada '96, pp. 231-47, 1996.

[1572] R. R. Klosch and R. T. Mittermeir, “Improving program understanding by unfolding layers of interacting patterns,” Proceedings. Fourth Workshop on Program Comprehension (Cat. No.96TB10033), pp. 208-17, 1996.

[1573] C. Koch, “Proven returns (Part 3),” Cio, pp. 64-68, 1996.

[1574] Y. Koike, Y. Maeda, and Y. Koseki, “Enhancing iconic program reusability with object sharing,” IEEE Symposium on Visual Languages, Proceedings, 1996.

[1575] P. Konas, “Where object-oriented technology meets parallel simulation,” Proceedings of the Twenty-Ninth Hawaii International Conference on System Sciences, pp. 360-3 vol.1, 1996.

[1576] R. Konopka, “Delphi business rule components,” Dbms, vol. 9, no. 12, pp. 108-11, Nov., 1996.

[1577] J. Kontio, “A case study in applying a systematic method for COTS selection,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 201-9, 1996.

[1578] S. Kopacsi, G. L. Kovacs, D. Gavalcova, and I. Kmecs, “Creating reusable assets from simulation models of flexible manufacturing systems,” Proceedings of the Fourth IASTED International Conference Robotics and Manufacturing, pp. 357-60, 1996.

[1579] T. Korson, “Managing reuse: applying the law of gravity,” Object Magazine, vol. 6, no. 2, pp. 34-6, April, 1996.

[1580] G. Kouroupetroglou, C. Viglas, A. Anagnostopoulos, C. Stamatis, and F. Pentaris, “A novel software architecture for computer-based interpersonal communication aids,” Interdisciplinary Aspects on Computers Helping People with Special Needs. 5th International Conference, ICCHP '96, pp. 715-20 vol.2, 1996.

[1581] W. Kowarschick, G. Kostler, and W. Kiessling, “Subtyping by constraints in object-oriented databases,” Object Technologies for Advanced Software. Second JSSST International Symposium ISOTAS'96. Proceedings, pp. 287-307, 1996.

[1582] M. Koyama, H. Tanaka, Y. Hiramatsu, and K. Kon, “Principal base technologies for new node switching software,” Ntt R & D, vol. 45, no. 6, pp. 535-42, 1996.

[1583] W. Kozaczynski and J. Q. Ning, “Component-based software engineering (CBSE),” Proceedings Fourth International Conference on Software Reuse, pp. 236-41, 1996.

[1584] K. Kozel, “The object of object-oriented authoring,” CD-ROM Professional, pp. 46-55, 1996.

[1585] U. Kracker-Lehnert and G. Reichelt, “Development of software using a modular system [for railway control],” Signal und Draht, vol. 88, no. 5, pp. 12-15, May, 1996.

[1586] J. Kreie, “Coad/Yourdon object-oriented and structured methodologies: A comparison of approaches,” Proceedings - Annual Meeting of the Decision Sciences Institute, 1996.

[1587] C. Kreitz, L. Kung-Kiu, and M. Ornaghi, “Formal reasoning about modules, reuse and their correctness,” Practical Reasoning. International Conference on Formal and Applied Practical Reasoning, FAPR'96. Proceedings, pp. 384-98, 1996.

[1588] R. J. Kreutzfeld and R. E. Neese, “A methodology for cost-effective software fault tolerance for mission-critical systems,” 15th DASC. AIAA/IEEE Digital Avionics Systems Conference, pp. 19-24, 1996.

[1589] B. Krieg-Bruckner, “Seven years of COMPASS,” Recent Trends on Data Type Specification. 11th Workshop on Specification of Abstract Data Types. Joint with the 8th COMPASS Workshop. Selected Papers, pp. 1-13, 1996.

[1590] B. Kroesen, “SCIAMACHY ICU: an application of preemptive scheduling with ADA on a 31750,” International Symposium on On-board Real-time Software ISOBRTS (ESA SP-375), pp. 61-6, 1996.

[1591] H. B. Kuan Tan and T. W. Ling, “Components reuse for data-intensive business programs through an object-oriented architecture,” Journal of Systems and Software, 1996.

[1592] W. Kuhn, P. Ohnacker, and H. Burkhart, “Support for software reuse and teaching: the Basel algorithm library BALI,” Parallel Computing: State-of-the-Art and Perspectives, pp. 141-8, 1996.

[1593] S. Kumar, P. C. Pendharkar, and J. A. Rodger, “Implementation of software reuse: Technical and organizational issues,” Proceedings - Annual Meeting of the Decision Sciences Institute, 1996.

[1594] O. B. Kwon and B. Jie, “Object-oriented approach to simulation model construction for CIM systems,” Simulation, 1996.

[1595] O. B. Kwon and P. Sung Joo, “RMT: a modeling support system for model reuse,” Decision Support Systems, vol. 16, no. 2, pp. 131-53, Feb., 1996.

[1596] R. Kyoung-Dong, L. Kang-Woo, and K. Hyoung-Joo, “Extending C++ language to support client-server programming,” Journal of KISS(B) (Software and Applications), vol. 23, no. 4, pp. 443-54, April, 1996.

[1597] D. K. Kythe, “The promise of distributed business components,” AT&T Technical Journal, vol. 75, no. 2, pp. 20-8, March-April, 1996.

[1598] J. Lakos, “Large-scale C++ software design: physical hierarchy. 2. Effective testing, improved maintainability, independent reuse,” C++ Report, vol. 8, no. 8, pp. 55-64, Sept., 1996.

[1599] J. Lakos, “Large-scale C++ sofware design. 1. Mentor Graphics experiences using C++ for large systems,” C++ Report, vol. 8, no. 6, pp. 26-37, June, 1996.

[1600] W. Lam, J. A. McDermid, and A. J. Vickers, “Reuse through standardisation: towards industry-standard engine control software,” Conference Volume. 1996 Avionics Conference and Exhibition, pp. 9 pp., 1996.

[1601] W. Lam, B. Whittle, J. McDermid, and S. Wilson, “An integrated approach to domain analysis and reuse for engineering complex systems,” Proceedings IEEE Symposium and Workshop on Engineering of Computer-Based Systems (Cat. No.96TB100022), pp. 102-9, 1996.

[1602] D. Lammers, “Cooperate, or else,” Electronic Engineering Times, pp. 27, 1996.

[1603] M. LaMonica, “Microsoft details OLE reuse strategy,” InfoWorld, pp. 6, 1996.

[1604] D. B. Lange, “An object-oriented design approach for developing hypermedia information systems,” Journal of Organizational Computing and Electronic Commerce, vol. 6, no. 3, pp. 269-93, 1996.

[1605] K. Lano, “Enhancing object-oriented methods with formal notations,” Theory and Practice of Object Systems, 1996.

[1606] L. Larsen and M. J. Harrold, “Slicing object-oriented software,” Proceedings of the 18th International Conference on Software Engineering (Cat. No.96CB35918), pp. 495-505, 1996.

[1607] K. K. Lau and M. Ornaghi, “Towards an object-oriented methodology for deductive synthesis of logic programs,” Logic Program Synthesis and Transformation. 5th International Workshop, LOPSTR95. Proceedings, pp. 152-69, 1996.

[1608] G. Lawton, “Object efforts gravitate,” Software Magazine, pp. 99-104 : Charts, 1996.

[1609] E. Leach, “Object technology standards: an OMG progress report,” Systematic Reuse: Issues in Initiating and Improving a Reuse Program. Proceedings of the International Workshop on Systematic Reuse, pp. 85-91, 1996.

[1610] R. J. Leach, “Methods of measuring software reuse for the prediction of maintenance effort,” Journal of Software Maintenance, 1996.

[1611] S. Leary, “C++ exception handling in multithreaded programs,” C++ Report, vol. 8, no. 2, pp. 20-31, Feb., 1996.

[1612] U. Lechner, C. Lengauer, E. I. Nickl, and M. Wirsing, “(Objects+concurrency) and reusability: a proposal to circumvent the inheritance anomaly,” ECOOP '96 - Object-Oriented Programming. 10th European Conference. Proceedings, pp. 232-47, 1996.

[1613] T. Ledoux and P. Cointe, “Explicit metaclasses as a tool for improving the design of class libraries,” Object Technologies for Advanced Software. Second JSSST International Symposium ISOTAS'96. Proceedings, pp. 38-55, 1996.

[1614] D.-T. Lee, “Semantic data modelling using linear logic,” Information Processing Letters, pp. 19-27 : Diagrams, Equations, 1996.

[1615] S. P. Lee, “Generic reuse model as basis of representation for reusable components,” Proceedings of the IASTED/ISMM International Conference. Intelligent Information Management Systems, pp. 223-8, 1996.

[1616] Y. L. Lee and S. McGoon, “Claris buys Web development tool,” InfoWorld, pp. 57, 1996.

[1617] G. Lefebvre and L. Houde, “Creation of a concept for advanced use of ecological risk assessment in environmental management,” Proceedings of the International Conference on Development and Application of Computer Techniques to Environmental Studies, 1996.

[1618] G. Lehmann, B. Wunder, and K. D. Mueller-Glaser, “Basic concepts for an HDL reverse engineering tool-set,” IEEE/ACM International Conference on Computer-Aided Design, Digest of Technical Papers, 1996.

[1619] G. Lehmann, B. Wunder, and K. D. Muller-Glaser, “A VHDL reuse workbench,” Proceedings EURO-DAC '96. European Design Automation Conference with EURO-VHDL '96 and Exhibition, pp. 412-17, 1996.

[1620] M. Leisner, “How source code can help you,” SIGICE Bulletin, vol. 21, no. 3, pp. 17-19, Jan., 1996.

[1621] M. Leon, “Unisys object repository gains OLE, third-party support,” InfoWorld, pp. 53, 1996.

[1622] J. Lepscky and M. Moreno, “From complexity to simplicity in software development: then and now,” CALICO '96 Annual Symposium. Proceedings of the Computer Assisted Language Instruction Consortium 1996 Annual Symposium Distance Learning', pp. 162-3, 1996.

[1623] R. Levin, “Corba stakes out new territory,” Informationweek, pp. 20A-22A, 1996.

[1624] R. Levin, “Design for reuse,” Informationweek, pp. 72-73, 1996.

[1625] R. Levin, “Don't send code down a black hole,” Informationweek, pp. 9A-10A, 1996.

[1626] R. Levin, “Link plan for component standards,” Informationweek, pp. 26, 1996.

[1627] R. Levin, “Next take on Windows development,” Informationweek, pp. 18A-20A, 1996.

[1628] R. Levin, “Platform selection was no accident,” Informationweek, pp. 20A-22A, 1996.

[1629] R. Levin, “Visual Basic aimed at Internet,” Informationweek, pp. 28, 1996.

[1630] R. Levin, “Ways to tackle Web programming,” Informationweek, pp. 15A-16A : Charts, 1996.

[1631] R. Levin, “Wrapping up legacy code,” Informationweek, pp. 77, 1996.

[1632] R. W. Lewis, “What are the benefits from using IEC 1131-3 PLC languages as the basis for training future control engineers?,” IEE Colloquium on Mechatronics in Education: Delivery of a New Engineering Discipline into the Workplace (Digest No.1996/071), pp. 7/1-17, 1996.

[1633] W.-S. Li and R. D. Holowczak, “Constructing information systems based on schema reuse,” International Conference on Information and Knowledge Management, Proceedings, 1996.

[1634] X. Li and G. Zheng, “Developing an object - oriented extension of Pascal,” Ruan Jian Xue Bao/Journal of Software, 1996.

[1635] X. Li and G. Zheng, “A modified inheritance mechanism enhancing reusability and maintainability in object-oriented languages,” Proceedings. 1996 Asia-Pacific Software Engineering Conference, pp. 93-102, 1996.

[1636] W. Li-Chih, “Object-oriented Petri nets for modelling and analysis of automated manufacturing systems,” Computer-Integrated Manufacturing Systems, vol. 9, no. 2, pp. 111-25, May, 1996.

[1637] L. Liebmann, “The Web speeds development (Part 10),” CommunicationsWeek, pp. 1,80+ : Diagrams, 1996.

[1638] P. Lightfoot and P. Mason, “Mission operations control architecture (MOCA) - an operations concept to reduce costs,” Wescon Conference Record, 1996.

[1639] W. C. Lim, “Evolution of the software reuse business,” International Conference on Software Reuse, 1996.

[1640] W. C. Lim, “Legal and contractual issues in software reuse,” International Conference on Software Reuse, 1996.

[1641] W. C. Lim, “Reuse economics: a comparison of seventeen models and directions for future research,” International Conference on Software Reuse, 1996.

[1642] J. T. Lin, Y. Kuang-Chao, and S. Liang-Chyau, “A context-based object-oriented application framework for discrete event simulation,” Computers & Industrial Engineering, vol. 30, no. 4, pp. 579-97, Sept., 1996.

[1643] J. T. Lin, K.-C. Yeh, and L.-C. Sheu, “Context-based object-oriented application framework for discrete event simulation,” Computers & Industrial Engineering, 1996.

[1644] T. Linenbach, “Implementing reusable binary association in C++,” C++ Report, vol. 8, no. 5, pp. 40-7, 51, May, 1996.

[1645] T. Linenbach, “Reusable binary associations in C++,” Dr. Dobbs Journal, vol. 21, no. 6, pp. 34, 36-41, 84, June, 1996.

[1646] D. S. Linthicum, “In search of the elusive OO metric,” Object Magazine, vol. 6, no. 6, pp. 64-6, Aug., 1996.

[1647] M. Liska and P. Menhart, “Parameter tables-the transparent approach to accessing the simulation model parameters,” ITI '96. Proceedings of the 18th International Conference on Information Technology Interfaces, pp. 439-44, 1996.

[1648] A. Liu and I. Gorton, “Modelling dynamic distributed system structures in PARSE,” Proceedings of the Fourth Euromicro Workshop on Parallel and Distributed Processing - PDP 96, pp. 352-9, 1996.

[1649] A. Llana, Jr., “Objects of a carrier's affection,” Cellular Business, pp. 26-30 : Diagrams, 1996.

[1650] J. Llorens, A. Amescua, and M. Velasco, “Adapting the information science techniques to the software engineering area: the application to the Software Thesaurus,” Proceedings of the Eleventh International Symposium on Computer and Information Sciences. ISCIS, pp. 303-15 vol.1, 1996.

[1651] J. Llorens, A. Amescua, and M. Velasco, “Software Thesaurus: a tool for reusing software objects,” Proceedings of the Fourth International Symposium on Assessment of Software Tools, pp. 99-103, 1996.

[1652] K. J. Loh and K. C. Chua, “Experience with implementation of multi-party video-conferencing application over packet networks,” IEEE GLOBECOM 1996. Communications: The Key to Global Prosperity. GLOBAL INTERNET'96. Conference Record (Cat. No.96CH35942), pp. 53-7, 1996.

[1653] C.-K. Looi, A. V. Laud, S. M. Mishra, and H.-C. Quek, “EPIGAME: a software environment for learning structures and strategies to guide inquiry,” Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, 1996.

[1654] C. M. Lott and H. D. Rombach, “Repeatable software engineering experiments for comparing defect-detection techniques,” Empirical Software Engineering, vol. 1, no. 3, pp. 241-77, 1996.

[1655] Y.-P. Luh, S.-S. Chiou, and J.-W. Chang, “Design of distributed control system software using client-server architecture,” Proceedings of the IEEE International Conference on Industrial Technology, 1996.

[1656] C.-H. Lung, J. E. Urban, and G. T. Mackulak, “Incorporation of relational modeling method into object-oriented analysis,” IEEE International Conference on Communications, 1996.

[1657] C. Lytle and R. K. Beachler, “Using intellectual property in programmable logic,” Electronic Product Design, vol. 17, no. 10, pp. 63-4, Oct., 1996.

[1658] Z. Ma, Z. Jin, and X. Lin, “Prototype of cell control platform based on object-oriented technology,” Fenmo Yejin Jishu/Powder Metallurgy Technology, 1996.

[1659] R. R. Macala, L. D. Stuckey, Jr., and D. C. Gross, “Managing domain-specific, product-line development,” IEEE Software, vol. 13, no. 3, pp. 57-67, May, 1996.

[1660] P. MacNeice, C. M. Mobarry, J. Crawford, and T. L. Sterling, “Preliminary insights on shared memory PIC code performance on the convex exemplar SPP1000,” Frontiers of Massively Parallel Computation - Conference Proceedings, 1996.

[1661] G. W. Macpherson, “A reusable Ada package for scientific dimensional integrity,” Ada Letters, vol. 16, no. 3, pp. 56-69, May-June, 1996.

[1662] N. Madhav, “Testing Ada 95 programs for conformance to RAPIDE architectures,” Reliable Software Technologies - Ada-Europe '96. 1996 Ada-Europe International Conference on Reliable Software Technologies. Proceedings, pp. 123-34, 1996.

[1663] N. H. Madhavji, “A system for evaluating the congruence of software process models,” Proceedings 1996 Australian Software Engineering Conference, pp. 144, 1996.

[1664] A. L. Mahou, F. J. Soto, F. Blanco, G. Pastor, J. Serna, M. A. Alfageme, J. Corera, R. Criado, V. Ferrer, J. Martin, and J. M. Garcia-Santesmases, “Final implementation of SEACON: new scope and new open system platform,” Proceedings of the 20th International Conference on Power Industry Computer Applications (Cat. No.97CH36013), pp. 54-9, 1996.

[1665] N. A. M. Maiden, “The transfer problem in analogical reuse,” Advances in Case-Based Reasoning. Third European Workshop, EWCBR-96. Proceedings, pp. 249-65, 1996.

[1666] N. A. M. Maiden and A. G. Sutcliffe, “Analogical retrieval in reuse-oriented requirements engineering,” Software Engineering Journal, vol. 11, no. 5, pp. 281-92, Sept., 1996.

[1667] M. Makowski, L. Somlyody, and D. Watkins, “Multiple criteria analysis for water quality management in the Nitra Basin,” Water Resources Bulletin, 1996.

[1668] K. Mangold, “Ada95-an approach to overcome the software crisis?,” Ada in Europe. Second International Eurospace - Ada Europe Symposium. Proceedings, pp. 4-10, 1996.

[1669] Z. Manna and A. Pnueli, “Clocked transition systems,” Logic and Software Engineering. International Workshop in Honor of Chih-Sung Tang, pp. 3-42, 1996.

[1670] N. R. Manohar and A. Prakash, “Flexible architecture for heterogeneous replayable workspaces,” International Conference on Multimedia Computing and Systems-Proceedings, 1996.

[1671] M. Mantyla, D. Nau, and J. Shah, “Challenges in feature-based manufacturing research,” Communications of the ACM, pp. 77-85 : Charts, Diagrams, 1996.

[1672] E. P. Mariatos, M. K. Birbas, A. N. Birbas, and N. Petrellis, “Object oriented prototyping at the system level: an image reconstruction application example,” Proceedings. Seventh IEEE International Workshop on Rapid System Prototyping. Shortening the Path from Specification to Prototyping, pp. 90-5, 1996.

[1673] B. Maring, “Object-oriented development of large applications,” IEEE Software, 1996.

[1674] M. Marshall, “MCI Registry bridges message brokers,” CommunicationsWeek, pp. 5 : Diagrams, 1996.

[1675] P. Martin, F. Crabbe, S. Adams, E. Baatz, and N. Yankelovich, “SpeechActs: a spoken-language framework,” Computer, 1996.

[1676] R. C. Martin, “Granularity [object-oriented design],” C++ Report, vol. 8, no. 10, pp. 57-62, Nov.-Dec., 1996.

[1677] R. C. Martin and J. Newkirk, “OOD and reuse in C++,” Object Magazine, vol. 6, no. 4, pp. 70-2, June, 1996.

[1678] J. Martinez, “The design of an extensible multimedia library for an OODBMS,” Proceedings. Seventh International Workshop on Database and Expert Systems Applications, pp. 208-13, 1996.

[1679] J. Martins and J. P. Hubaux, “Evaluating performance from formal specification,” IEEE International Workshop on Modeling, Analysis, and Simulation of Computer and Telecommunication Systems - Proceedings, 1996.

[1680] J. Martins, J. P. Hubaux, T. Saydam, and S. Znaty, “Integrating performance evaluation and formal specification,” 1995 IEEE International Conference on Communications. Converging Technologies for Tomorrow's Applications. ICC '96. Conference Record (Cat. No.96CH35916), pp. 1803-7 vol.3, 1996.

[1681] K. Maruyama and K. Shima, “New software components with an autonomous changing mechanism,” Proceedings. 1996 Asia-Pacific Software Engineering Conference, pp. 154-65, 1996.

[1682] K. Maruyama and K. I. Shima, “A mechanism for automatically and dynamically changing software components,” Transactions of the Information Processing Society of Japan, vol. 37, no. 12, pp. 2334-51, Dec., 1996.

[1683] K. Maruyama and N. Takahashi, “Extracting reusable software components by using bounded program slicing,” Transactions of the Information Processing Society of Japan, vol. 37, no. 4, pp. 520-35, April, 1996.

[1684] M. Maslar, “PLC standard programming languages: IEC 1131-3,” IEEE Conference Record of Annual Pulp and Paper Industry Technical Conference, 1996.

[1685] M. Mastretti, M. L. Busi, R. Sarvello, M. Sturlesi, and S. Tomasello, “Static analysis of VHDL source code: The SAVE project,” Achieving Quality in Software. Proceedings of the Third International Conference on Achieving Quality in Software, 1996, pp. 121-32, 1996.

[1686] F. Maurer, “Current status of case-retrieval in engineering domains: an analysis from the knowledge engineering perspective,” Knowledge-Based Systems, 1996.

[1687] R. Mauth, “A better foundation [software reuse],” Byte, vol. 21, no. 9, pp. IS40/10-13, Sept., 1996.

[1688] P. May, “Reusable strategies: patterns, frameworks and idioms,” Object World UK '96, pp. 93-7, 1996.

[1689] J. Mayfield, Y. Labrou, and T. Finin, “Evaluation of KQML as an agent communication language,” Intelligent Agents II. Agent Theories, Architectures, and Languages. IJCAI95 Workshop (ATAL) Proceedings, pp. 347-60, 1996.

[1690] F. Maymir-Ducharme, “Product-line software reuse from an automotive perspective,” Ada IC News, vol. 14, no. 3, pp. 12-14, Fall, 1996.

[1691] B. W. Mazziotti, “Get more mileage from flexible simulation,” IIE Solutions, pp. 14-22 : Charts, 1996.

[1692] C. McClure, “Organizing for software reuse,” Managing System Development, vol. 16, no. 6, pp. 1-4, June, 1996.

[1693] M. K. McGee, “Training : Not just kid stuff,” Informationweek, pp. 34-40, 1996.

[1694] B. McGibbon, “Making reuse happen,” Object Expert, vol. 1, no. 5, pp. 42-6, July-Aug., 1996.

[1695] B. McGibbon, “Secrets in managing your move to objects,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 110-17, 1996.

[1696] J. D. McGregor, “Winning strategies for managing object technology,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 1-7, 1996.

[1697] J. D. McGregor, J. Doble, and A. Keddy, “A pattern for reuse,” Object Magazine, vol. 6, no. 2, pp. 38-40, 42, 44-7, April, 1996.

[1698] J. D. McGregor and A. Keddy, “Making reuse happen,” Objekt-Orientiertes Programmieren - OOP '96 Conference Proceedings, pp. 8-15, 1996.

[1699] J. McKendrick, “Beyond Web-based interfaces,” Midrange Systems, pp. 42, 1996.

[1700] K. S. McKinley and O. Temam, “A quantitative analysis of loop nest locality,” SIGPLAN Not. (USA), SIGPLAN Notices, vol. 31, no. 9, pp. 94-104, Sept., 1996.

[1701] K. S. McKinley and O. Temam, “Quantitative analysis of loop nest locality,” Computer Architecture News, 1996.

[1702] M. D. J. McNeill, M. White, and P. F. Lister, “Graphics codesign for multimedia systems,” Proceedings of the Eleventh International Symposium on Computer and Information Sciences. ISCIS, pp. 667-74 vol.2, 1996.

[1703] N. Medvidovic, P. Oreizy, J. E. Robbins, and R. N. Taylor, “Using object-oriented typing to support architectural design in the C2 style,” Proceedings of the ACM SIGSOFT Symposium on the Foundations of Software Engineering, 1996.

[1704] H. Mehling, “Choose your architecture,” Informationweek, pp. 51-57 : Graphs, 1996.

[1705] C. Melear, “The RISC MPC505 MCU in cable set top converters,” Southcon/96. Conference Record (Cat. No.CH35925), pp. 634-9, 1996.

[1706] J. Meng and S.-F. Chang, “Tools for compressed-domain video indexing and editing,” Proceedings of SPIE - The International Society for Optical Engineering, 1996.

[1707] K. Merrill, “Primus tool : Fast, reusable support,” Computer Reseller News, pp. 55, 1996.

[1708] E. Messmer, “Customers share Java stories,” Network World, pp. 33 : Charts, 1996.

[1709] E. Messmer, “Sun chock full of JavaBeans,” Network World, pp. 47, 1996.

[1710] B. Meyer, “Conceptual perspective,” Computer, 1996.

[1711] B. Meyer, “Reality: a cousin twice removed [object technology],” Computer, vol. 29, no. 7, pp. 96-7, July, 1996.

[1712] B. Meyer, “The reusability challenge,” Computer, vol. 29, no. 2, pp. 76-8, Feb., 1996.

[1713] P. Mi and W. Scacchi, “A meta-model for formulating knowledge-based models of software development,” Decision Support Systems, vol. 17, no. 4, pp. 313-30, 4, 1996.

[1714] R. Mikkilineni and M. A. Ketabchi, “Encapsulation and enrichment towards improving the reusability of software components,” Information & Systems Engineering, vol. 2, no. 3-4, pp. 139-58, Dec., 1996.

[1715] N. H. Minsky, V. Ungureanu, Z. Junbiao, and W. Wenhui, “Building reconfiguration primitives into the law of a system,” Proceedings. Third International Conference on Configurable Distributed Systems (Cat. No.96TB100046), pp. 89-97, 1996.

[1716] G. Minton, “Programming with CORBA,” UNIX Review, pp. 29-39 : Charts, Diagrams, 1996.

[1717] A. Mishra and J. Kozik, “Switching system performance under software reuse,” IEEE International Conference on Communications, 1996.

[1718] P. Molin, “Designing reliable systems from reliable components using the context-dependent constraint concept,” Proceedings of the International Symposium on Software Reliability Engineering, ISSRE, 1996.

[1719] M. Monden, K. Nishikawara, I. Kogiku, and M. Ohminami, “Platform software technologies for NTT's next generation communications switching systems: NS8000 series,” Ntt R & D, vol. 45, no. 6, pp. 543-50, 1996.

[1720] S. Moni and D. W. White, “FrameView: Object-oriented visualization system for frame analysis,” Journal of Computing in Civil Engineering, 1996.

[1721] R. T. Monroe and D. Garlan, “Style-based reuse for software architectures,” International Conference on Software Reuse, 1996.

[1722] S. A. Moody, “Migrating well engineered Ada 83 applications into newer architecture and reuse based Ada 95 systems. Experiences from Boeing's Reuse Initiative project,” Proceedings TRI-Ada '96, pp. 219-29, 1996.

[1723] A. Morch, “Evolving a generic application into a domain-oriented design environment,” Scandinavian Journal of Information Systems, vol. 8, no. 2, pp. 63-90, Nov., 1996.

[1724] J. M. Morel, “Planning for reuse,” Systematic Reuse: Issues in Initiating and Improving a Reuse Program. Proceedings of the International Workshop on Systematic Reuse, pp. 14-32, 1996.

[1725] I. Morschel and C. Ebert, “Applying metrics for quality analysis and improvement of object-oriented software,” Achieving Quality in Software. Proceedings of the Third International Conference on Achieving Quality in Software, 1996, pp. 291-302, 1996.

[1726] S. Mostert, “A visual method for real-time software engineering,” Transactions of the South African Institute of Electrical Engineers, vol. 87, no. 3, pp. 128-39, Sept., 1996.

[1727] E. Motta, A. Stutt, Z. Zdrahal, K. Ohara, and N. Shadbolt, “Solving VT in VITAL: a study in model construction and knowledge reuse,” International Journal of Human-Computer Studies, vol. 44, no. 3-4, pp. 333-71, March-April, 1996.

[1728] P. Mudhar, P. Glen, C. Capellmann, R. Janmaat, and J. Norgaard, “View of a future intelligent network,” British Telecommunications Engineering, 1996.

[1729] P. Muenchaisri and T. Minoura, “Software composition with extended entity-relationship diagrams,” Proceedings of the Second USENIX Conference on Object-Oriented Technologies and Systems (COOTS), pp. 113-27, 1996.

[1730] G. Mula, C. Angius, F. Casula, G. Maxia, M. Porcu, and Y. Jinlong, “The SEISM project: a software engineering initiative for the study of materials,” Materials Theory, Simulations, and Parallel Algorithms. Symposium, pp. 3-8, 1996.

[1731] J. T. Mulqueen, “Documentum bounds onto doc management scene,” CommunicationsWeek, pp. 63 : Graphs, 1996.

[1732] T. Murakami, T. Moriya, M. Sugahara, and M. Shima, “Environment for load creation and supply for testing switching software,” Conference Record / IEEE Global Telecommunications Conference, 1996.

[1733] G. C. Murphy and D. Notkin, “Difficulties with object-oriented frameworks,” Studies of Software Design. ICSE 93 Workshop. Selected Papers, pp. 77-87, 1996.

[1734] G. C. Murphy and D. Notkin, “On the use of static typing to support operations on frameworks,” Object Oriented Systems, vol. 3, no. 4, pp. 197-213, Dec., 1996.

[1735] B. A. Myers and D. S. Kosbie, “Reusable hierarchical command objects,” Conference on Human Factors in Computing Systems - Proceedings, 1996.

[1736] B. A. Myers, R. C. Miller, R. McDaniel, and A. Ferrency, “Easily adding animations to interfaces using constraints,” UIST (User Interface Software and Technology): Proceedings of the ACM Symposium, 1996.

[1737] M. V. Nagendra, S. E. Lander, and V. R. Lesser, “Role of learning in systems of reusable heterogeneous design agents,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM, 1996.

[1738] M. Naguleswaran and W. Kreutzer, “Towards a domain framework for modelling linear space in urban systems,” Proceedings. 1996 International Conference Software Engineering: Education and Practice, pp. 372-7, 1996.

[1739] K. Nakakoji, A. Aoki, and B. N. Reeves, “Knowledge-based cognitive support for multimedia information design,” Information & Software Technology, pp. 191-200 : Charts, Graphs, 1996.

[1740] K. Nakanishi and T. Arano, “A metric for evaluating effectiveness of object-oriented interface abstraction for promoting software reuse,” Object Technologies for Advanced Software. Second JSSST International Symposium ISOTAS'96. Proceedings, pp. 215-26, 1996.

[1741] M. Natori, A. Kagaya, and S. Honiden, “Reuse of design processes based on domain analysis,” International Conference on Software Reuse, 1996.

[1742] M. Natori, A.